SetTapePosition info  Overview  Group

The SetTapePosition sets the tape position on the specified device.

DWORD SetTapePosition(

Parameters

hDevice

Identifies the device on which to set the tape position. This handle is created by using the CreateFile function.

dwPositionMethod

Specifies the type of positioning to perform. This parameter must be one of the following values:

Value	Meaning
TAPE_ABSOLUTE_BLOCK	Moves the tape to the device-specific block address specified by the dwOffsetLow and dwOffsetHigh parameters. The dwPartition parameter is ignored.
TAPE_LOGICAL_BLOCK	Moves the tape to the block address specified by dwOffsetLow and dwOffsetHigh in the partition specified by dwPartition.
TAPE_REWIND	Moves the tape to the beginning of the current partition. The dwPartition, dwOffsetLow, and dwOffsetHigh parameters are ignored.
TAPE_SPACE_END_OF_DATA	Moves the tape to the end of the data on the partition specified by dwPartition.
TAPE_SPACE_FILEMARKS	Moves the tape forward (or backward) the number of filemarks specified by dwOffsetLow and dwOffsetHigh in the current partition. The dwPartition parameter is ignored.
TAPE_SPACE_RELATIVE_BLOCKS	Moves the tape forward (or backward) the number of blocks specified by dwOffsetLow and dwOffsetHigh in the current partition. The dwPartition parameter is ignored.
TAPE_SPACE_SEQUENTIAL_FMKS	Moves the tape forward (or backward) to the first occurrence of n filemarks in the current partition, where n is the number specified by dwOffsetLow and dwOffsetHigh. The dwPartition parameter is ignored.
TAPE_SPACE_SEQUENTIAL_SMKS	Moves the tape forward (or backward) to the first occurrence of n setmarks in the current partition, where n is the number specified by dwOffsetLow and dwOffsetHigh. The dwPartition parameter is ignored.
TAPE_SPACE_SETMARKS	Moves the tape forward (or backward) the number of setmarks specified by dwOffsetLow and dwOffsetHigh in the current partition. The dwPartition parameter is ignored.

dwPartition

Specifies the partition to position within. If dwPartition is zero, the current partition is used. Partitions are numbered logically from 1 through n, where 1 is the first partition on the tape and n is the last.

dwOffsetLow

Specifies the low-order 32 bits of the block address or count for the position operation specified by the dwPositionMethod parameter.

dwOffsetHigh

Specifies the high-order 32 bits of the block address or count for the position operation specified by the dwPositionMethod parameter. If the high-order 32 bits are not required, this parameter should be zero.

bImmediate

Indicates whether to return as soon as the move operation begins. If this parameter is TRUE, the function returns immediately; if FALSE, the function does not return until the move operation has been completed.

Return Values

If the function succeeds, the return value is NO_ERROR.

If the function fails, the return value is one of the following error codes:

Remarks

If the offset specified by dwOffsetLow and dwOffsetHigh specifies the number of blocks, filemarks, or setmarks to move, a positive offset moves the tape forward to the end of the last block, filemark, or setmark. A negative offset moves the tape backward to the beginning of the last block, filemark, or setmark. If the offset is zero, the tape does not move.

To obtain information about the status, capabilities, and capacities of tape drives and media, call the GetTapeParameters function.

See Also

CreateFile, GetTapeParameters, GetTapePosition 

  .