Prev Next
The SetTapeParameters function either specifies the block size of a tape or configures the tape device.
DWORD SetTapeParameters(
|
HANDLE hDevice, |
// handle of open device |
|
DWORD dwOperation, |
// type of information to set |
|
LPVOID lpTapeInformation |
// address of buffer with information to set |
|
); |
|
Value |
Description |
|
SET_TAPE_MEDIA_INFORMATION |
Sets the tape-specific information specified by the lpTapeInformation parameter. |
|
SET_TAPE_DRIVE_INFORMATION |
Sets the device-specific information specified by lpTapeInformation. |
If dwOperation is SET_TAPE_DRIVE_INFORMATION, lpTapeInformation points to a TAPE_SET_DRIVE_PARAMETERS structure.
If the function succeeds, the return value is NO_ERROR.
If the function fails, the return value is one of the following error codes:
|
Error |
Description |
|
ERROR_BEGINNING_OF_MEDIA |
An attempt to access data before the beginning-of-medium marker failed. |
|
ERROR_BUS_RESET |
A reset condition was detected on the bus. |
|
ERROR_END_OF_MEDIA |
The end-of-tape marker was reached during an operation. |
|
ERROR_FILEMARK_DETECTED |
A filemark was reached during an operation. |
|
ERROR_SETMARK_DETECTED |
A setmark was reached during an operation. |
|
ERROR_NO_DATA_DETECTED |
The end-of-data marker was reached during an operation. |
|
ERROR_PARTITION_FAILURE |
The tape could not be partitioned. |
|
ERROR_INVALID_BLOCK_LENGTH |
The block size is incorrect on a new tape in a multivolume partition. |
|
ERROR_DEVICE_NOT_PARTITIONED |
The partition information could not be found when a tape was being loaded. |
|
ERROR_MEDIA_CHANGED |
The tape that was in the drive has been replaced or removed. |
|
ERROR_NO_MEDIA_IN_DRIVE |
There is no media in the drive. |
|
ERROR_NOT_SUPPORTED |
The tape driver does not support a requested function. |
|
ERROR_UNABLE_TO_LOCK_MEDIA |
An attempt to lock the ejection mechanism failed. |
|
ERROR_UNABLE_TO_UNLOAD_MEDIA |
An attempt to unload the tape failed. |
|
ERROR_WRITE_PROTECT |
The media is write protected. |
GetTapeParameters, TAPE_SET_DRIVE_PARAMETERS, TAPE_SET_MEDIA_PARAMETERS
| file: /Techref/os/win/api/win32/func/src/f82_10.htm, 6KB, , updated: 2000/4/7 11:19, local time: 2024/11/30 04:22,
18.116.49.243:LOG IN
|
| ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://sxlist.com/techref/os/win/api/win32/func/src/f82_10.htm"> SetTapeParameters</A> |
| Did you find what you needed? |
Welcome to sxlist.com!sales, advertizing, & kind contributors just like you! Please don't rip/copy (here's why Copies of the site on CD are available at minimal cost. |
Welcome to sxlist.com! |
.