Simple Commands is a demonstration program for the 16F873A containing a Simple Commands decoder and example routines to enter and print single and multi-byte data values in HEX, change command bits, and control program execution from a serial port. Using the Simple Commands demonstration program as a starting point for program development and selecting and customizing the routines you need for your application, adding serial port commands and data entry to your PIC program is easy!
Simple Time Interval Counter with RS-232 Output - This counter uses a 14-pin 16F688 PIC, a GPS receiver 1PPS as a reference, has variable averaging time set by serial port command, and provides a 10-digit BCD output to an RS-232 port. It is a low-cost four-IC solution for determining the time difference between a locally generated 1PPS and a GPS 1PPS and logging the difference to a computer for analysis. Demonstrates the addition of Simple Commands in page 0 memory to alter or print a single variable in a user program.
See also:
Richard H McCorkle of Solid State Services refers to
+
file: /Techref/member/RHM-SSS-SC4/index.htm, 1KB, , updated: 2006/8/10 20:28, local time: 2024/11/8 18:49,
owner: RHM-SSS-SC4,
3.142.54.18:LOG IN ©2024 PLEASE DON'T RIP! THIS SITE CLOSES OCT 28, 2024 SO LONG AND THANKS FOR ALL THE FISH!
|
©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://www.sxlist.com/techref/member/RHM-SSS-SC4/index.htm"> Member Homepage for RHM-SSS-SC4</A> |
Did you find what you needed? From: "http://sxlist.com/member/RHM-SSS-SC4/index.htm" |