Versions: MSS 5Si v3.00
Description: When the &f...Y &f2X command is used to activate a form in a SmartSIMM with version 3.00 firmware in a 5Si MX, the lines on the form print, but the text does not. This is intermittent and occurs only with certain forms.
Workaround: Use &f3X or &f4X
Resolution: In work
Submitted by:
Mr. James Newton
file: /Techref/printer/itm407.htm, 0KB, , updated: 1999/11/4 15:23, local time: 2024/11/27 16:51,
3.145.34.237:LOG IN
|
©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://sxlist.com/techref/printer/itm407.htm"> Form prints lines but not text when executed (&f2X) vs. overlayed (&f4X) on 5Si SmartSimm.</A> |
Did you find what you needed? |
Welcome to sxlist.com!sales, advertizing, & kind contributors just like you! Please don't rip/copy (here's why Copies of the site on CD are available at minimal cost. |
Welcome to sxlist.com! |
.