please dont rip this site

PICList Project

Communitary Universal Microcontroller Programmer

The CUMP concept

CUMP List

Resolutions

To develop a device programming platform that

News

28/08/2003

As should be obvious from the inactivity of both the list and this site, the whole CUMP project is in a bit of a slump right now. I hope it'll get back into the swing of things before too long, but right now there aren't really any signs of that happening.

25/04/2003

Currently, the biggest discussion going is whether the bus should be left with the original parallel configuration or if it would be better to drop that entirely and go for a serial implementation of the CUMP concept.

If the serial implementation is decided upon, then the next question is which serial protocol to use for inter-board communications. Currently, the two contenders seem to be I2C and RS-422.

25/04/2003

I've finally gotten around to reworking this site. It should get a lot better soon. Here are some of the changes that I will be making:

I'm going to see what I can do about W3C compliance, but I don't know how much I can do about that within the PICList.com framework. Go here for the old page.

Development

History

Glossary

Donations


file: /Techref/piclist/cump/newcump.htm, 2KB, , updated: 2003/8/28 13:36, local time: 2024/12/27 14:57, owner: BJM-bigfoot-486,
TOP NEW HELP FIND: 
18.223.241.235:LOG IN

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF="http://sxlist.com/techref/piclist/cump/newcump.htm"> Communitary Universal Microcontroller Programmer</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?

 

Welcome to sxlist.com!


Site supported by
sales, advertizing,
& kind contributors
just like you!

Please don't rip/copy
(here's why

Copies of the site on CD
are available at minimal cost.
 

Welcome to sxlist.com!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .