Prev Next

UDM_SETBASE Overview Group

The UDM_SETBASE message sets the radix base for an up-down control. The base value determines whether the buddy window displays numbers in decimal or hexadecimal digits. Hexadecimal numbers are always unsigned, and decimal numbers are signed.

UDM_SETBASE 

wParam = (WPARAM) nBase;	 

lParam = 0;

Parameters

nBase: New base value for the control. This parameter can be 10 for decimal or 16 for hexadecimal.

Return Values

The return value is the previous base value. If an invalid base is given, the return value is zero.

file: /Techref/os/win/api/win32/mess/src/msg21_25.htm, 1KB, , updated: 2000/4/7 11:20, local time: 2024/11/30 11:52,

^{3.144.31.86:LOG IN}

©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?

Please DO link to this page! Digg it! / MAKE!

<A HREF="http://sxlist.com/techref/os/win/api/win32/mess/src/msg21_25.htm"> UDM_SETBASE</A>

Did you find what you needed?

Welcome to sxlist.com!

Site supported by
sales, advertizing,
& kind contributors
just like you!
Please don't rip/copy
(here's why
Copies of the site on CD
are available at minimal cost.