The alternative is to make the DIP adapter yourself. I used enamelled copper
wires (Gauge around 33) to connect a 10F206 in SOT-23 package to a machine
pin 8-pin socket. Attached is a photograph of what I made. The other file
shows the connections between the PIC and the socket. NOTE THAT THE PIC IN
THE CENTRE OF THE SOCKET IS UPSIDE DOWN. Since you would need only one for
the purpose of trying out your design and code, making a PCB is not necessary
unless you plan to make and sell them.
Any comments?
Regards,
Bala.Chandar at sanofi-aventis,c0m
Comments:
file: /Techref/microchip/10FAdapter.htm, 1KB, , updated: 2007/10/5 12:36, local time: 2024/8/14 17:53,
18.217.212.151:LOG IN
|
©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://sxlist.com/techref/microchip/10FAdapter.htm"> PIC 10Fxxx DIP programming adapter</A> |
Did you find what you needed? |
Welcome to sxlist.com!sales, advertizing, & kind contributors just like you! Please don't rip/copy (here's why Copies of the site on CD are available at minimal cost. |
Welcome to sxlist.com! |
.