This is file "coredump.asm".
;=============================================================================== ; ; Copyright (c) 2008-2010, Isaac Marino Bavaresco ; All rights reserved. ; ; Redistribution and use in source and binary forms, with or without ; modification, are permitted provided that the following conditions are met: ; * Redistributions of source code must retain the above copyright ; notice, this list of conditions and the following disclaimer. ; * Neither the name of the author nor the ; names of its contributors may be used to endorse or promote products ; derived from this software without specific prior written permission. ; ; THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY ; EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED ; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ; DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY ; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; ; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ; ;=============================================================================== ; isaacbavaresco@yahoo.com.br ;=============================================================================== radix decimal ;=============================================================================== #include <P18CXXX.inc> ;=============================================================================== code ;=============================================================================== extern _startup ;=============================================================================== #define TEST_BOR ;=============================================================================== global __init0 ;--------------------------------------------------------------- ; Test the reason for the reset without affecting any SFRs or RAM __init0: btfss RCON,5,ACCESS ; NOT_CM bra CoreDump btfss RCON,NOT_TO,ACCESS ; NOT_TO bra CoreDump btfsc STKPTR,STKFUL,ACCESS ; STKFUL bra CoreDump #ifdef TEST_BOR btfsc STKPTR,STKUNF,ACCESS ; STKUNF bra CoreDump btfss RCON,NOT_POR,ACCESS ; NOT_POR bra Finish btfsc RCON,NOT_BOR,ACCESS ; NOT_BOR bra Finish #else btfss STKPTR,STKUNF,ACCESS ; STKUNF bra Finish #endif ;--------------------------------------------------------------- ; Save the critical SFRs CoreDump: movff STATUS,EDATA movff WREG,EDATA movff FSR0L,EDATA movff FSR0H,EDATA movff RCON,EDATA movff STKPTR,EDATA ;clrwdt ;--------------------------------------------------------------- ; Save the hardware stack StackDump: movlw 31 movwf FSR0L,ACCESS iorwf STKPTR,f,ACCESS StackLoop: movff TOSL,EDATA movff TOSH,EDATA movff TOSU,EDATA decf STKPTR,f,ACCESS decfsz FSR0L,f,ACCESS bra StackLoop ;--------------------------------------------------------------- ; Save the RAM from 0x000 to 0xeff RAMDump: lfsr 0,0 movlw 0x0f Loop1: movff POSTINC0,EDATA cpfseq FSR0H,ACCESS bra Loop1 ;--------------------------------------------------------------- ; Save the RAM from 0xf00 to 0xf5f and the SFR at 0xf60 (EIR) movlw 0x61 Loop2: movff POSTINC0,EDATA cpfseq FSR0L,ACCESS bra Loop2 ;--------------------------------------------------------------- ; Skip the SFR at 0xf61 (EDATA) addfsr 0,1 clrf EDATA,ACCESS ;--------------------------------------------------------------- ; Save the SFRs from 0xf62 up to 0xfd7 movlw 0xd8 Loop3: movff POSTINC0,EDATA cpfseq FSR0L,ACCESS bra Loop3 ;--------------------------------------------------------------- ; Save the SFRs between the INDFx groups movlw 3 Loop4: movff POSTINC0,EDATA movff POSTINC0,EDATA movff POSTINC0,EDATA ; Skip INDFn & family addfsr 0,5 clrf EDATA,ACCESS clrf EDATA,ACCESS clrf EDATA,ACCESS clrf EDATA,ACCESS clrf EDATA,ACCESS decfsz WREG,f,ACCESS bra Loop4 ;--------------------------------------------------------------- ; Save the SFRs from 0xff0 up to 0xfff movlw 0x00 Loop5: movff POSTINC0,EDATA cpfseq FSR0L,ACCESS bra Loop5 ;--------------------------------------------------------------- ; Continue with the boot-up Finish: goto _startup ;=============================================================================== end ;===============================================================================
file: /Techref/member/IMB-yahoo-J86/coredump.asm.htm, 6KB, , updated: 2010/6/24 20:19, local time: 2024/8/31 16:16,
owner: IMB-yahoo-J86,
3.141.193.235:LOG IN
|
©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://sxlist.com/techref/member/IMB-yahoo-J86/coredump.asm.htm"> A core-dump implementation for PIC18 devices with on-chip Ethernet controller - coredump.asm</A> |
Did you find what you needed? |