please dont rip this site

IO Ports

Bus contention

Unused pins

If you need to transfer files between two computers the cheapest solution is to use interlnk.exe and intersvr.exe provided with your old dos 6.2. You can use them to transfer between DOS, Windows 95, and even Windows 98. See also:

Follow these steps

  1. Get a laplink cable (Printer port to Printer port is faster) they cost about $15 and connect the two computers with that
  2. Copy the interlnk.exe and intersvr.ext files to a floppy disk
  3. Copy the intersvr.exe to the source computer (ie. the computer where your files are)
  4. Edit the config.sys file in the source computer to add the line device=intersvr.exe (if you copy the file to a subdirectory change this line to suit)
  5. Restart the computer and go to the DOS mode or Command prompt mode
  6. Start the other computer also in the DOS mode or (Command prompt)
  7. Run Interlnk.exe in the other computer (client)
  8. You must now get the message telling that the drive letters are redirected and you can access the other hard drive from this machine
  9. Use Xcopy, Xtree or any other copy program to copy the files across. As an example
    XCOPY F:\ C:\ /s /e

    will copy the files and subdirectories from drive F: to drive C:

  10. Delete the unnecessary files and put the config.sys file back to original

See also:

Questions:


file: /Techref/io/ports.htm, 3KB, , updated: 2014/12/11 13:00, local time: 2024/12/25 06:06,
TOP NEW HELP FIND: 
18.224.43.98:LOG IN

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF="http://sxlist.com/techref/io/ports.htm"> IO Ports</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?

 

Welcome to sxlist.com!


Site supported by
sales, advertizing,
& kind contributors
just like you!

Please don't rip/copy
(here's why

Copies of the site on CD
are available at minimal cost.
 

Welcome to sxlist.com!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .