VOL+Displaying the Volume NameDisplays a disk's volume name.
VERSION
PC-DOS 2.0+
MS-DOS equivalent: VOL (2.0+)
TYPE
Internal
SYNTAX
VOL [d:]
OPTIONS
d: Specifies the disk to check.
The VOL command is used to determine the volume label given
to a disk when it was formatted.
EXAMPLE
VOL
displays the volume label entered when the disk on the current
drive was formatted. If the volume label is SCRIPTS, the message
Volume in drive C is SCRIPTS
is returned.
------------------------------------------------------------------
[For related topics, press R]
SEE ALSO
CHKDSK Command
LABEL Command
SELECT Command
SYS Command
VER Command
file: /Techref/dos/command/vol.htm, 0KB, , updated: 1999/2/20 11:24, local time: 2024/8/31 21:25,
18.223.125.110:LOG IN
|
©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://sxlist.com/techref/dos/command/vol.htm"> dos command vol</A> |
Did you find what you needed? |
Welcome to sxlist.com!sales, advertizing, & kind contributors just like you! Please don't rip/copy (here's why Copies of the site on CD are available at minimal cost. |
Welcome to sxlist.com! |
.