VERIFY+Verifying DataVerifies that data was correctly written on a disk.
VERSION
PC-DOS 2.0+
MS-DOS equivalent: VERIFY (2.0+)
TYPE
Internal
SYNTAX
VERIFY [ON]
or
VERIFY [OFF]
OPTIONS
ON Turns verification on until the system
is rebooted.
OFF Turns verification off once it has been
turned on.
The VERIFY command is used to confirm that information is
written correctly each time the system writes information.
EXAMPLE
VERIFY
displays whether VERIFY is currently turned on or off.
NOTE
With VERIFY on, DOS checks information each time it writes
it to disk, which can slow writing speed slightly. You can also
use the COPY command with the /V option if you prefer to verify
on a case-by-case basis.
------------------------------------------------------------------
[For related topics, press R]
SEE ALSO
ATTRIB Command
DEL (DELETE) and ERASE Commands
DIR Command
PRINT Command
RENAME EN) Command
REPLACE Command
SHARE Command
TYPE Command
XCOPY Command
file: /Techref/dos/command/verify.htm, 1KB, , updated: 1999/2/20 11:24, local time: 2024/8/31 21:25,
18.223.125.110:LOG IN
|
©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://sxlist.com/techref/dos/command/verify.htm"> dos command verify</A> |
Did you find what you needed? |
Welcome to sxlist.com!sales, advertizing, & kind contributors just like you! Please don't rip/copy (here's why Copies of the site on CD are available at minimal cost. |
Welcome to sxlist.com! |
.