Function  1Fh Get Default Drive Parameter Block   *  Same as function call 32h (below), except that the table is accessed from  
    the default drive 
entry   AH      1Fh 
	other registers unknown 
return  AL      00h     no error 
		0FFh    error 
	DS:BX   points to DOS Disk Parameter Block for default drive. 
note 1) Unknown vector returned in ES:BX. 
     2) For DOS 2.x and 3.x, this just invokes Int\21f\32 (undocumented, Read
        DOS Disk Block) with DL=0

file: /Techref/INT/21f/1f.htm, 0KB, , updated: 1999/4/26 11:31, local time: 2024/11/25 06:31,

^{3.144.235.138:LOG IN}

©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?

Please DO link to this page! Digg it! / MAKE!

<A HREF="http://sxlist.com/techref/INT/21f/1f.htm"> INT 21f 1f</A>

Did you find what you needed?

Welcome to sxlist.com!

Site supported by
sales, advertizing,
& kind contributors
just like you!
Please don't rip/copy
(here's why
Copies of the site on CD
are available at minimal cost.