please dont rip this site

SX Specific RS-485 IO

Ruben Jönsson [rubenj at pp.sbbs.se] says:

I have built an RS485 master/slave networked temperature measurement system were each RS485 node can connect to up to 32 DS18S20 devices on a 1-wire network.

The system is used for measuring temperatures on grain at different heights in a grain bin. The temp sensors are inside a cable that is hanging from the ceiling in the bin. Each cable is connected to one RS485 node.

The network is connected to a PC which displays a physical layout of the site (could be a picture or a scanned blueprint) with temperature values overlayed on the image at different colors depending on alarm and warning levels.

The board for the RS485 node is equiped with 1 SX18 processor at 4MHz, 1 24LC16 EEPROM for storing the 1-wire device addresses of each sensor connected to this node (the addresses are automatically scanned and detected with a ROM search upon power up), the 485 circuitry (2400bps, half duplex), interface circuitry for the 1-wire, 2 BCD switches to set the address of the node and 2 leds for status indication.

I have also done a version of this board that is a stand alone hand held battery operated unit with an LCD and two buttons. This is limited to cables with max 14 1-wire tempsensors.

I have used the EEPROM in the 1820 sensor to store an index number of the physical location of the sensor on the 1-wire network in the cable. When the device address is found during the ROM search I know at which height level this sensor is located in this cable.

==============================
Ruben Jönsson
AB Liros Elektronik
Box 9124, 200 39 Malmö, Sweden
TEL INT +46 40142078
FAX INT +46 40947388
ruben@pp.sbbs.se
==============================

Questions:


file: /Techref/scenix/lib/io/osi3/rs485/index.htm, 2KB, , updated: 2005/10/15 00:10, local time: 2024/11/12 13:09,
TOP NEW HELP FIND: 
3.144.84.61:LOG IN

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF="http://sxlist.com/Techref/scenix/lib/io/osi3/rs485/index.htm"> SX Specific RS-485</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?

 

Welcome to sxlist.com!


Site supported by
sales, advertizing,
& kind contributors
just like you!

Please don't rip/copy
(here's why

Copies of the site on CD
are available at minimal cost.
 
Quick, Easy and CHEAP! RCL-1 RS232 Level Converter in a DB9 backshell
Ashley Roll has put together a really nice little unit here. Leave off the MAX232 and keep these handy for the few times you need true RS232!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .