SX Embedded Controller Instruction

MOV W,fr
Description:	Move fr into W
Operation:	W = fr
Flags affected:	Z
Registers affected:	W
Sources referenced:	fr
Cycles:	1
Opcode:
Details:	SX Users Manual page # 95
Microchip PIC syntax:	MOVF fr,0
Notes:

Phil Pilgrim says: Incidentally, the way to move a register to W without setting any flags is:

        SWAP Reg
        MOV  W,<>Reg
        SWAP Reg        'Optional, to restore Reg to original state.

or, if RTW is enabled:

        MOV   W,<>Reg
        SWAP  WREG

file: /Techref/scenix/inst/movwfr.htm, 1KB, , updated: 2007/2/28 17:26, local time: 2024/12/27 20:10,

^{3.140.185.250:LOG IN}

©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?

Please DO link to this page! Digg it! / MAKE!

<A HREF="http://sxlist.com/Techref/scenix/inst/movwfr.htm"> SX Instruction MOV W,fr</A>

Did you find what you needed?

Welcome to sxlist.com!

Site supported by
sales, advertizing,
& kind contributors
just like you!
Please don't rip/copy
(here's why
Copies of the site on CD
are available at minimal cost.