Desription: Using RAM-FLASH-DISK from TransForm to download forms or fonts into the 5Si SmartSIMM with firmware version 3.00 causes the printer to print garbage data if more than one form or font is in the project. Also, the printer reports that it is doing an internal test repeatedly during the download. The printer may refuse to print a status page.
This error is caused by a timing problem in the printer that causes the printer to go off-line and lose data between download segments. While the printer is off-line after the first form or font is downloaded, some data from the next form or font is lost.
Workaround: Downloading one form at a time will work despite the internal test message on the printer.
Resolution: fixed in TransForm version 2.1L
Submitted by:
James Newton
Thomas Villwock
Mr. Howard Roberts
| file: /Techref/printer/itm334.htm, 1KB, , updated: 1999/11/4 15:23, local time: 2024/12/2 05:13,
18.191.87.157:LOG IN
|
| ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://sxlist.com/Techref/printer/itm334.htm"> Download to HP LJ 5Si SmartSIMM version 3.00 from TransForm prints garbage.</A> |
| Did you find what you needed? |
Welcome to sxlist.com!sales, advertizing, & kind contributors just like you! Please don't rip/copy (here's why Copies of the site on CD are available at minimal cost. |
Welcome to sxlist.com! |
.