The easiest but most expensive way to use SMD devices is to use a socket. The ability to quickly mount or replace a very fine pitch, high pin count device while developing can justify the extra expense.
Also:
See also:
| file: /Techref/pcb/smd/sockets.htm, 0KB, , updated: 2012/12/24 11:37, local time: 2024/11/8 14:37,
52.15.187.50:LOG IN ©2024 PLEASE DON'T RIP! THIS SITE CLOSES OCT 28, 2024 SO LONG AND THANKS FOR ALL THE FISH!
|
| ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://sxlist.com/Techref/pcb/smd/sockets.htm"> SMD: Surface Mount Device Sockets</A> |
| Did you find what you needed? |
Welcome to sxlist.com!sales, advertizing, & kind contributors just like you! Please don't rip/copy (here's why Copies of the site on CD are available at minimal cost. |
|
Ashley Roll has put together a really nice little unit here. Leave off the MAX232 and keep these handy for the few times you need true RS232! |
.