COMP

Compares the contents of two files or sets of files.

COMP [data1] [data2] [/D] [/A] [/L] [/N=number] [/C]

  data1     Specifies location and name(s) of first file(s) to compare.
  data2     Specifies location and name(s) of second files to compare.
  /D        Displays differences in decimal format. This is the default
            setting.
  /A        Displays differences in ASCII characters.
  /L        Displays line numbers for differences.
  /N=number Compares only the first specified number of lines in each file.
  /C        Disregards case of ASCII letters when comparing files.

To compare sets of files, use wildcards in data1 and data2 parameters.

Back to the top of this page