; PiCBoard
;
; PC-Keyboard emulator using a PIC16F84
; Scan a 32 key keyboard ( with alternative mapping = 64 keys )
;
; COPYRIGHT (c)1999 BY Tony Kübek
; This is kindly donated to the PIC community. It may be used freely,
; and you are forbidden to deprive others from those rights.
; Please read the FSF (Free Software Foundation) GNU statement.
;
;*********************************************************************
;
; E-MAIL tony.kubek@flintab.se
;
;
; DATE 2000-01-23
; ITERATION 1.0B
; FILE SAVED AS PiCBoard.ASM
; FOR PIC16F84-10/P
; CLOCK 10.00 MHz RESONATOR ( OSC-HS )
; INSTRUCTION CLOCK 2.50 MHz T= 0.4 us
; SETTINGS WDT-ON, PWT-ON, CP-OFF
; REVISION HISTORY
; 0.1b - First beta, mainly for testing
; 1.0b - First public beta release
;
;
;
;
;***************************************************************************
;
; PREFACE ;-)
;
; This is NOT an tutorial on pc keyboards in general, there are quite
; a few sites/etc that have that already covered. However i DID find
; some minor ambiguities regarding the actual protocol used but nothing
; that warrants me to rewrite an complete pc keyboard FAQ.
; So for 'general' pc keyboard info ( scancodes/protocol/pin config/etc )
; here are some useful links:
;
; http://www.senet.com.au/~cpeacock/
; http://ourworld.compuserve.com/homepages/steve_lawther/keybinfo.htm
; http://204.210.50.240/techref/default.asp?url=io/keyboard.htm
; http://www.arne.si/~mauricio/PIC.HTM
;
; PLEASE do not complain about code implementation, I know there are parts
; in which is it 'a bit' messy and hard to follow, and other parts where
; the code is not optimised. Take it as is. Futhermore I did hesitate
; to include all of the functionality thats currently in, but decided to
; keep most of it, this as the major complaint i had with the other available
; pc-keyboard code was just that - 'is was incomplete'. Also do not
; be discoraged by the size and complexity of it if you are an beginner,
; as a matter of fact this is only my SECOND program ever using a pic.
; I think I managed to give credit were credit was due ( 'borrowed code' ).
; But the originators of these snippets has nothing to do with this project
; and are probably totally unaware of this, so please do not contact them
; if you have problems with 'my' implementation.
;
; BTW ( shameless plug ) UltraEdit rules ! ( if you dont have it, get it ! )
; http://www.ultraedit.com ( dont 'forget' the 'wordfile' for PIC, color indenting )
; Without that I guess this file would be 'messy'.
;
; Ok with that out of the way here we go:
;
;
;***************************************************************************
; DESCRIPTION ( short version ;-) )
; A set of routines which forms a PC keyboard emulator.
; Routines included are:
; Interrupt controlled clock ( used for kb comm. and 'heart beat )
; A 4x8 matrix keyboard scanner ( using an 74HCT4051 3 to 8 analogue multiplexer )
; Communincation with PC keyboard controller, both send end recive.
; PC keyboard routines are using 4 pins (2 inputs & 2 outputs) to control
; keyboard's 2 bidirectional OC lines (CLK & DATA). The following
; 'drawing' conceptually shows how to connect the related pins/lines
;
; ( ASCII art/info shamelessly 'borrowed' from http://www.arne.si/~mauricio/PIC.HTM )
;
; vcc vcc
; | |
; \ -+-
; / 2K2 /_\ 1N4148
; \ |
; pcCLOCK_in -----------------o---o------o--------- kbd CLOCK
; | | |
; 2N2222 |50pF -+-
; pcCLOCK_out ____/\/\/\____|/ === /_\
; 2K2 |\> | |
; | | |
; /// /// ///
;
; An identical circuit is used for the DATA line.
; Note: The 2N2222 transitors can be replaced with BC337 ( NPN ) which are cheaper
; The keyboard matrix routines are using RB4-RB7 as inputs.
; and RB0-RB2 as output to/from an 3 to 8 multiplexer
; so that it can read up to 4x8 keys ( 32 ).
;
; RA4/TOCK1 is an input from an jumper, if low then keyrepeat is disabled and
; alt-key is enabled instead i.e. instead of repeating a key that has
; been depressed a certain amount of time, a bit is set that can change the
; scancode for a key ( of course, all keys can have an alternate scancode ).
; To exit the alt. keymap press the 'enter alt. keymap' key once again or wait until
; timeout. ( defined in the code )
; NOTE !! The so called 'enter alt. keymap' key is hardcoded, i.e the key
; i've choosen in this 'example' is Column 1 Row 2, if this is to be changed
; code has to be changed/moved in the debounce and checkkeystate routines.
; ( marked with <-------Alt keymap code-------> )
; RB3 is currently used for a flashing diode. ( running )
; Note my real keyboard ( KeyTronic ) uses a clock rate of 40 us, my implementation
; uses about 50 us, easily to change.
;
;***************************************************************************
; DESCRIPTION ( longer version ;-) )
;
; Pin Used for
; ------------------------------------------------------------
; RA0 Pc keyboard data out ( to pc )
; RA1 Pc keyboard data in ( from pc )
; RA2 Pc keyboard clock in
; RA3 Pc keyboard clock out
; RA4 Flashing disco led 0.5s duty cycle( could be used for some more meaningful purpose )
;
; RB0 Least significant bit in column adress to 4051 multiplexer ( own keyboard )
; RB1 Middle...
; RB2 Most significant bit -- || --
; RB3 Input. Disable keyrepeat & enable alternative keymapping ( if = '0',ground)
; OR if '1' ( free,+V ) enable keyrepeat & disable alternative keymapping
; RB4 Own keyboard input row 1
; RB5 --- || --- row 2
; RB6 --- || --- row 3
; RB7 --- || --- row 4
;
; 'Basic program structure':
;
; Init - Initialise ports , ram, int, vars
; Start delay - After init the timer int is enabled and the flashing led will
; start to toggle ( flash ). Before I enter the mainloop
; ( and send any keycodes ) I wait until the led has flashed
; twice. This is of course not really needed but I normally
; like to have some kind of start delay ( I know 1 sec is a bit much :-) )
; Time Int - The timer interrupt (BIG), runs in the background:
; - 'Normal' rate 0.5 ms, when in rx/tx rate is 27 us
; - Performs an rx/tx check, then jumps to rx, tx or 'heart beat' code.
; - TX code sends a byte to pc, at a rate of 27us per int.
; The int rate is actually double the bit rate, as
; a bit is shifted out in the middle of the clock pulse,
; I've seen different implementations of this and I think
; that the bit is not sampled until clock goes low again BUT
; when logging my keyboard ( Keytronic ) this is the way that it
; does it. When all bits are sent, stopbit/parity is sent.
; And the key is removed from the buffer.
; After stopbit/parity is sent, a delay is inserted ( 0.5 ms )
; before next rx/tx check.
; - RX code recevies a byte from the pc, PIC is controlling clock !!
; Int rate ( 27 us ) is, again, double bit rate.
; Toggles clock and samples the data pin to read a byte from pc.
; When reception is finished an 'handshake' takes place.
; When a byte has been recevied a routine is called to check
; which command and/or data was received. If it was
; keyboard rate/delay or led status byte, it is stored in local ram
; variables. NOTE: The rate/delay is not actually used for
; key repeat as the code is right now ( I use my 'own' fixed rate/delay )
; however it is very easy to implement.
; After handshake a delay is inserted ( 0.5 ms )
; before next rx/tx check.
; - 'Heart beat' ( idle code 0.5 ms tick ) performs:
; - Check clock/data lines to see if pc wants to send something or
; if tx is allowed.
; - If tx is possible it checks the keybuffer for an available key and
; if keys are in buffer then it initiates a tx seq.
; and sets the int rate to 27 us.
; - If the pc wants to send something, an rx seq. is initiated
; ( there is some handshaking involved, during which
; the int rate is set to 60 us ) after that, the int rate is
; set to 27 us and an rx seq is started.
; - Divides some clock counters to achive 10ms,100ms,500ms sections.
; - In 100 ms section it performes a numlock status check and
; keyrepeat check ( both rate and delay is local in 100 ms ticks,
; thats why I dont use the 'real' rate delay )
; - If numlock status is not the desired one code is called to
; toggle the numlock status.
; - If a key has been pressed long enough for repeat, an bit is set
; so we can repeat the key ( send the scancode again ) in the main loop.
; - In 500 ms section the led is toggled on each loop
; - Some various alternative keymap checks to get out of
; alternative keymap. ( i'll get to that in a bit )
;
; Main loop - Outputs an adress to the 4051 multiplexer waits 1 ms
; reads the row inputs ( 4 bits/keys ), increments address
; and outputs the new adress, waits 1 ms and reads the input
; ( next 4 bits/keys ). Now using the address counter, calls a
; debounce/send routine that first debounces the input,
; ( four consecutive readings before current state is affected )
; and when a key is changed a make/break code is sent ( put in buffer ).
; In the next loop the next two columns are read etc. until all
; 4 column pairs are read.
; - If keyrepeat is enabled ( see pin conf. above ) the
; repeat flag is checked and if '1' the last pressed key scancode
; is sent again ( put in buffer ).
; - If keyrepeat is not enabled( alternative keymap is enabled instead )
; then various checks to exit the alternative keymap are performed instead.
;
; Scancodes for all key are located in a lookup table at the end of this file,
; each key has four program rows, to make room for extended codes and alt. keymap codes.
;
; Explanation of 'alternative' keymap:
;
; Using this program ( or an heavily modified version of it anyway :-) )
; on a computer running Windows posed some small problems; namely:
; -The keyboard ( mapping ) I used did not have any 'special' key such as
; <alt>,<ctrl>,<tab> etc.
; -In windows, things can go wrong, :-) if a dialog pops up or something similar
; there were just no way one could dispose of this with the keymapping i used.
; - 'Only' 28 keys were implemented ( hardware wise ).
; In this particular case the keyrepeat was disabled ( due to the nature of the application )
; Therefore i came up with the solution to use the keyrepeat related routines and vars.
; To handle a so called 'alternative' keymapping.
; This means that an key is dedicated to be the alt. keymap toggle key,
; when pressing this longer than the programmed repeat delay, instead of
; repeating the key a bit variable is set to use another set of scancodes for
; the keyboard. This 'alternative' keymap is then enabled even though the
; alt. keymap toggle key is released, but it also incorporates an timeout
; that will return to normal keymap if no key is pressed within a certain time ( currently 7 sec )
; Of course pressing the alt. keymap toggle key again ( while in alt. keymap )
; will return the keyboard to the normal keymap.
; NOTE !! the key choosen for the alt. keymap toggle is hardcoded, so if the scancode
; for this is changed in the lookup table, changes have to be made in other routines
; as well. ( namly : CHECK_KEY_STATE, and DEBOUNCE_COLUMN routines )
; While in alt. keymap each key CAN have an alternative scancode ( see lookup table ).
; Also by using the numlock bit, one can toggle numlock status 'on the fly' when entering
; or exiting the alt keymap.
;
; Some notes about the local keyboard interface ( matrix ):
; Although the hardware circuit and software allows virtually unlimited
; simultaneosly pressed keys, the keyboard matrix itself normally poses
; some limitations on this. If an keymatrix without any protective diodes
; are used then one would have loops INSIDE the keymatrix itself when
; multiple keys are pressed in different columns .
; Look at the ( although horrible ;-) ) ASCII art below(internal weak pullup enabled):
; 0 - Key is free
; 1 - Key is pressed ( connection between hor/ver rows )
; Three keys pressed adressing ( reading ) left column :
;
; To pic1 --------0-------0------ ( row 1 )
; | |
; To pic2 --------1-------1------ ( row 2 )
; | |
; To pic3 --------1-------0------ ( row 3 )
; | |
; Column(4051) 0V - ( Current column is set to 0V when adressing )
;
; This works as intended, we can read a '0' on pic inputs 2,3 which
; is what we expected. The current ( signal ) follows the route marked with '*':
; ( only the 'signal path' is shown for clarity )
;
; To pic1 --------0-------0------ ( row 1 )
; | |
; To pic2 *********-------1------ ( row 2 )
; * |
; To pic3 *********-------0------ ( row 3 )
; * |
; Column(4051) 0V - ( Current column is set to 0V when adressing )
;
; However, when we now read ( address ) the right column instead we
; do not read what is expected ( same three keys still pressed ):
;
; To pic1 --------0-------0------ ( row 1 )
; | |
; To pic2 *****************------ ( row 2 )
; *<- *
; To pic3 *********-------*------ ( row 3 )
; | *
; Column(4051) - 0V ( Current read column is set to 0V when adressing )
;
; As you can see the 'signal' travels in the keymatrix itself ( where the '<-' is )and
; will cause a 'ghost' signal to be read on the pic. So instead
; of having an '0' on input 2 only we also can read an '0' on input 3.
; This is because the two keys in column 1 are interconnected ( when they are pressed ).
; Keep this in mind if you are planning to support multiple pressed keys.
;
;
;***************************************************************************
;
; Some suggestions for 'improvements' or alternations
;
; - Using the jumper 'disable-repeat' as a dedicated key for switching
; to alternative keymapping.
; - Enable repeat in alternative keymapping
; - Clean up TX/RX code ( a bit messy )
; - Using the led output ( or jumper input ) as an extra adress line
; to the multiplexers ( in this case 2 pcs. 74HCT4051 ) we could have
; 4x16 keys instead. Would require some heavy modifications though
; as there are not much ram/program space left. But if alternative
; keymapping is discarded ( most likely if one has 64 keys ) each
; key in the lookup table only needs to be 2 lines instead of 4.
; That would 'only' require some modifications to preserv ram.
; - Using the EERAM for 'macros' or similar ( not used at all now )
;
;***************************************************************************
;
; LEDGEND
;
; I tend to use the following when naming vars. etc. :
; ( yes i DO like long names )
;
; For 'general' purpose pins:
;
; An input pin is named I_xxx_Name where :
;
; I_ - This is an input pin ;-)
; xxx_ - Optional what type of input, jmp=jumper etc.
; Name - Self explanatory
;
; An output pin is named O_xxx_Name where:
;
; O_ - This is an output pin ;-)
; xxx_ - Optional what type of output, led=LED etc.
; Name - Self explanatory
;
; Application(function) specific pins:
;
; An application(function) specific pin is named xxName where:
;
; xx - What/Where, for example pc=To/From pc
; Name - Self explanatory ( what does it control etc )
;
; An #define/constant/equ (no pin or ram ) uses all capital letters e.x. #define BREAK 0xF0
;
; A bit variable will always start with '_'. For example '_IsLedStatus'
;
; All other ( mostly ramvars. ) are named in various ways.
;
;
;***************************************************************************
TITLE "PC Keyboard emulator - By Tony Kübek"
Processor 16F84
Radix DEC
EXPAND
;***** HARDWARE DEFINITIONS ( processor type include file )
INCLUDE <C:\PROGRAM\MPLAB\P16F84.INC> ; this might need changing !
;***** CONFIGURATION BITS
__CONFIG _WDT_ON&_HS_OSC&_CP_OFF&_PWRTE_ON ; _WDT_OFF
__IDLOCS 010Bh ; version 1.0B
;***** CONSTANT DEFINITIONS
CONSTANT BREAK = 0xF0 ; the break key postfix ( when key is released )
CONSTANT EXTENDED = 0xE0 ; the extended key postfix
; As i dont really use the rate/delay I receive from the pc ( easy to change )
; this is the current rate/delay times i use:
CONSTANT DELAY_ENTER_ALTKEYMAP = 0x1E ; x100 ms , approx 3 seconds ( 30 x 100 ms )
; how long the 'enter altkeymap' key must
; be in pressed state before the altkeymap is enabled
CONSTANT DELAY_EXIT_ALTKEYMAP = 0x0F ; x0.5 sec , approx 7.5 sec
; how long before we exit the alt keymap if no key is
; pressed.
CONSTANT DELAY_REPEAT = 0x08 ; x100 ms, approx 800 ms
; how long before we START repeating a key
CONSTANT DELAY_RATE = 0x02 ; x100 ms, approx 200 ms repeat rate
; how fast we are repeating a key ( after the delay above )
;***** CONSTANT DEFINITIONS ( pins )
; For connection with PC keyboard
#define pcCLOCK_in PORTA,2 ; Input PC keyboard clock
#define pcCLOCK_out PORTA,3 ; Output PC keyboard clock
#define pcDATA_in PORTA,1 ; Input PC keyboard data
#define pcDATA_out PORTA,0 ; Output PC Keyboard data
; For connection (input) with our own keyboard
; Note I actually dont use these (definitions!) in the program, but they might come in handy
; at one time or another ;-) ( I use the pins though.. )
#define kbROW_1 PORTB,7
#define kbROW_2 PORTB,6
#define kbROW_3 PORTB,5
#define kbROW_4 PORTB,4
; Indications ( output )
#define O_led_KEYCOMM_ok PORTA,4 ; communication seems ok led ( flashing )
; Disable/enable key repeat input jumper
#define I_jmp_NoRepeat PORTB,3 ; note: internal weak pullup enabled
; For keybuffer ( using the indirect file selector FSR )
#define KeyBufferHead FSR
;***** RAM ASSIGNMENT
CBLOCK 0x0C
KeyBufferTail ; where the last byte in buffer is..
clkCount ; used for clock timing
Offset ; used for table reads
Saved_Pclath ; Saved registers during interrrupt
Saved_Status ; -----
Saved_w ; -----
CurrKey ; current key ( rx or tx )..
KeyParity ; key parity storage ( inc. for every '1' )
Divisor_10ms ; for the timer
Divisor_100ms ; ditto
Divisor_500ms ;
Divisor_Repeat ; timer for repeated key sends
Flags ; various flags
RepeatFlags ; flags for repeating a key
bitCount ; bitcounter for tx/rx
Comm_Flags ; flags used by both rx and tx routines
Temp_Var ; temp storage, can be used outside int loop
TRX_Flags ; flags used by both rx and tx routines
CommandData ; bit map when receving data bytes from pc
; for example led status/ delay / etc
KbLedStatus ; to store status led bitmap for keyboard ( pc first sends 'ED' then this byte )
; bit 0=Scroll lock ( 1=on )
; bit 1=Num lock
; bit 2=Caps lock
; bits 3-7 = unused
KbRateDelay ; to store repeat delay/rate ( pc first sends 'F3' then this byte )
; bit 0-4 (rate) = '00000' is 30x/sec '11111' is 2x/sec ( i.e. value * 33 ms )
; bit 5-7 (delay)= '00' is 250 ms, '11' is 1000 ms ( ie. value * 250 ms )
; bit 7 = unused
BufTemp ; temp byte for storing scancode to put in buffer
Temp ; temp byte, used locally in buffer routine
Temp2 ;
LastKey ; stores the last sent key
KbBufferMin ; where our keybuffer starts
Kb1 ; used in keybuffer
Kb2 ; used in keybuffer
Kb3 ; used in keybuffer
Kb4 ; used in keybuffer
Kb5 ; used in keybuffer
Kb6 ; used in keybuffer
Kb7 ; used in keybuffer
Kb8 ; used in keybuffer
Kb9 ; used in keybuffer
Kb10 ; used in keybuffer
KbBufferMax ; end of keybuffer
TempOffset ; temporary storage for key offset ( make/break )
LastMakeOffset ; storage of last pressed key ( offset in table )
RepeatTimer ; timer to determine how long a key has been pressed
RepeatKey ; the key to repeat
repTemp ; temporary storage in repeat key calc.
repKeyMap ; bit pattern for the column in which the repeat key is in
; i.e. a copy of kbColumnXX_Old where 'XX' is the column
LastKeyTime ; counter when last key was pressed, used to get out of altkeymap
; after a specific 'timeout'
kbScan ; scan code for pressed/released key
kbTemp ; temp storage for key states
kbState ; which keys that has changed in current columns
kbBitCnt ; bit counter for key check ( which key/bit )
kbColumnCnt ; column counter ( loops from 8 to 0 )
; Used as output to multiplexer/decoder and in debounce routines
kbColumnVal ; current value of the last 2 columns ( 2x4bits = 8 bits ) input pins ( keys )
;
; Note the kbColumnXX_New variables is not really needed
; used it while making the program ( debugging ;-) ).
; so if more free ram is needed change code using these to use
; the current 'input' sample instead. ( kbColumnVal )
kbColumn12_New ; New debounced reading for column 1 & 2
kbColumn12_Old ; Latest known valid status of column 1 & 2
kbColumn12Cnt ; Debounce counter for column 1 & 2
kbColumn12State ; State of debounce for column 1 & 2
kbColumn34_New ; New debounced reading for column 3 & 4
kbColumn34_Old ; Latest known valid status of column 3 & 4
kbColumn34Cnt ; Debounce counter for column 3 & 4
kbColumn34State ; State of debounce for column 3 & 4
kbColumn56_New ; New debounced reading for column 5 & 6
kbColumn56_Old ; Latest known valid status of column 5 & 6
kbColumn56Cnt ; Debounce counter for column 5 & 6
kbColumn56State ; State of debounce for column 5 & 6
kbColumn78_New ; New debounced reading for column 7 & 8
kbColumn78_Old ; Latest known valid status of column 7 & 8
kbColumn78Cnt ; Debounce counter for column 7 & 8
kbColumn78State ; State of debounce for column 7 & 8
ENDC
;******* END RAM
; *** flags used by both rx and tx routines
#define _isParity Comm_Flags,0 ; bit in rx/tx is parity bit
#define _KeyError Comm_Flags,1 ; set to '1' when an error is detected
#define _isStartBit Comm_Flags,2 ; set to '1' when bit in rx/tx is startbit
#define _isStopBit Comm_Flags,3 ; --- || --- but stopbit
#define _RxCanStart Comm_Flags,4 ; for handshaking, when negotiating an rx seq.
; *** dito used for rx and tx
#define _KeyReceived TRX_Flags,0 ; rx
#define _RX_Mode TRX_Flags,1 ; rx is in progress ( started )
#define _doRXAck TRX_Flags,2 ; do rx handshake
#define _RXAckDone TRX_Flags,3 ; rx handshake is done
#define _RXEnd TRX_Flags,4 ; rx seq is finished
#define _RXDone TRX_Flags,5 ; rx exit bit
#define _KeySent TRX_Flags,6 ; tx key has been succesfully sent
#define _TX_Mode TRX_Flags,7 ; tx is in progress ( started )
; *** flags to determine the meaning of an incomming data is
; i.e. when then pc has sent a 'data follow' instruction
; these bits are set according to the command,
; i.e. the next incomming byte is.....
#define _IsLedStatus CommandData,0 ; the next incoming byte contains kb led status
#define _IsRateDelay CommandData,1 ; the next incoming byte contains kb rate/delay
#define _SkipByte CommandData,2 ; other data not saved
; *** bit meaning in KbLedStatus ( the leds on the keyboard )
; i.e local ram copy of this byte
#define _LedScrollLock KbLedStatus,0 ; '1' led is on
#define _LedNumLock KbLedStatus,1 ;
#define _LedCapsLock KbLedStatus,2 ;
#define _IsFirstLedStatus KbLedStatus,7 ; set this to '1' at startup, to know that our local
; ; copy (led status) is not yet syncronised. Used to
; ; 'force' sync. the first time we set the local numlock bit.
; *** flags used for various purposes
#define _Timer Flags,0 ; used for waiting
;#define _WrongPar Flags,1 ; ?? ( used during dev. to force wrong parity sends, removed )
#define _LastColumn Flags,2 ; for kb scan code
#define _isBreak Flags,3 ; if '1' the currently handled key is break ( released ), else make ( pressed )
;#define _isFree Flags,4 ; Not used ! ( temporary during dev. )
#define _AltKeymap Flags,5 ; is we use alternative keymap ( other scancodes ) see below !
; enabled ONLY when keyrepeat is disabled ( I_jmp_NoRepeat (RB3) is low )
#define _ExitAltKeymap Flags,6 ; start checking if we should exit alternative keymap
; if all keys are 'free' ( not pressed ) we exit altkeymap
#define _InAltKeymap Flags,7 ; if we are waiting for second press/release to get out of altkeymap
#define _doRepeat RepeatFlags,0 ; if the last pressed key should be 'repeated'
#define _doSendKey RepeatFlags,1 ; send the key in RepeatKey to pc
#define _isExtended RepeatFlags,2 ; temp flag if last key is extended
#define _RepeatIsExt RepeatFlags,3 ; the key to repeat is extended key
#define _startRepeat RepeatFlags,4 ; start repeat timer
#define _DoExitAltKeymap RepeatFlags,5 ; bit set when we are getting out of alternative keymap
#define _NumLock RepeatFlags,6 ; 'mirror' of numlockstatus, by setting/clearing this bit
; numlock status will be changed.
; I.e. there is no need to 'manually' send break/make code for numlock
; key, by setting this bit to '1' numlock status will by automaticlly
; ( inside int handler ) set to 'on'( within 100 ms ). Se code for example.
#define _WaitNumLock RepeatFlags,7 ; bit set when we have sent make/break numlock scancode
; and waiting for numlock status byte reply.
; ( to inhibit a new numlock scancode send )
;**************************************************************************
; Macros
;**************************************************************************
;+++++
; BANK0/1 selects register bank 0/1.
; Leave set to BANK0 normally.
BANK0 MACRO
BCF STATUS,RP0
ENDM
BANK1 MACRO
BSF STATUS,RP0
ENDM
;+++++
; PUSH/PULL save and restore W, PCLATH and STATUS registers -
; used on interrupt entry/exit
PUSH MACRO
MOVWF Saved_w ; Save W register on current bank
SWAPF STATUS,W ; Swap status to be saved into W
BANK0 ; Select BANK0
MOVWF Saved_Status ; Save STATUS register on bank 0
MOVFW PCLATH
MOVWF Saved_Pclath ; Save PCLATH on bank 0
ENDM
PULL MACRO
BANK0 ; Select BANK0
MOVFW Saved_Pclath
MOVWF PCLATH ; Restore PCLATH
SWAPF Saved_Status,W
MOVWF STATUS ; Restore STATUS register - restores bank
SWAPF Saved_w,F
SWAPF Saved_w,W ; Restore W register
ENDM
;+++++
; We define a macro that will switch an output pin on or off depending
; on its previous state. We must be on bank0 !!
;
TOGGLE_PIN MACRO WHICH_PORT,WHICH_PIN
LOCAL TOGGLE_PIN10, TOGGLE_END
BTFSC WHICH_PORT,WHICH_PIN ; is the pin high ?
GOTO TOGGLE_PIN10 ; yes, clear it
BSF WHICH_PORT,WHICH_PIN ; no, so set it
GOTO TOGGLE_END
TOGGLE_PIN10:
BCF WHICH_PORT,WHICH_PIN ; clear the pin
TOGGLE_END:
ENDM
;*************************************************************
; Credit for routine ( almost unchanged, expect it's now a macro ;-) )
; goes to Scott Dattalo http://www.interstice.com/~sdattalo/technical/software/software.html
; ( debouce routine at http://www.interstice.com/~sdattalo/technical/software/pic/debounce.html )
;
; DEBOUNCE_BYTE - 'debounces' 8 bits, when a bit state
; has been 'active' for 4 consecutive debounce loops
; it's state is put into the 'debounced' sample ( i.e. output )
;
; The purpose of this routine is to debounce, i.e. digitally low pass filter
; inputs. The algorithm handles upto 8 bits at a time. An input is considered
; filtered if it has not changed states in the last 4 samples.
;
; 2-bit cyclic vertical counters count the 4 samples. As long as there is no
; change, the counters are held in the reset state of 00b. When a change is detected
; between the current sample and the filtered or debounced sample, the counters
; are incremented. The counting sequence is 00,01,10,11,00... When the counters
; roll over from 11b to 00b, the debounced state is updated. If the input changes
; back to the filtered state while the counters are counting, then the counters
; are re-initialized to the reset state and the filtered state is unaffected.
; In other words, a glitch or transient input has been filtered.
;
; Here's the C-psuedo code:
;
;static unsigned clock_A,clock_B,debounced_state
;
;debounce(unsigned new_sample)
;{
; unsigned delta;
;
; delta = new_sample ^ debounced_state; //Find all of the changes;
; clock_A ^= clock_B; //Increment the counters
; clock_B = ~clock_B;
;
; clock_A &= delta; //Reset the counters if no changes
; clock_B &= delta; //were detected.
;
; //Preserve the state of those bits that are being filtered and simultaneously
; //clear the states of those bits that are already filtered.
; debounced_state &= (clock_A | clock_B);
; //Re-write the bits that are already filtered.
; debounced_state |= (~(clock_A | clock_B) & new_sample);
;}
;
; The 2-bit counters are arranged "vertically". In other words 8 counters
; are formed with 2 bytes such that the corresponding bits in the bytes are
; paired (e.g. MSBit of each byte is paired to form one counter).
; The counting sequence is 0,1,2,3,0,1,... And the state tables and Karnaugh
; maps are:
;
;State Table: Karnaugh Maps:
;pres next B
; SS SS 0 1
; AB AB +---+---+ +---+---+
;-------- A 0| | 1 | | 1 | |
; 00 01 +---+---+ +---+---+
; 01 10 1| 1 | | | 1 | |
; 10 11 +---+---+ +---+---+
; 11 00 A+ = A ^ B B+ = ~B
;
; Here's the PIC code that implements the counter:
; MOVF SB,W ;W = B
; XORWF SA,F ;A+ = A ^ B
; COMF SB,F ;B+ = ~B
; 14 instructions
; 15 cycles
; Inputs:
; NewSample - The current sample
; Outputs
; DebouncedSample - The current value (filtered version of NewSample)
;
; VARS used
; DBCnt,
; DBState - State variables for the 8 2-bit counters
;
DEBOUNCE_BYTE MACRO NewSample,DebouncedSample,DBCnt,DBState
;Increment the vertical counter
MOVF DBState,W
XORWF DBCnt,F
COMF DBState,F
;See if any changes occurred
MOVF NewSample,W
XORWF DebouncedSample,W
;Reset the counter if no change has occurred
ANDWF DBState,F
ANDWF DBCnt,F ;Determine the counter's state
MOVF DBState,W
IORWF DBCnt,W
;Clear all bits that are filtered-or more accurately, save
;the state of those that are being filtered
ANDWF DebouncedSample,F
XORLW 0xff ;Re-write the bits that haven't changed.
ANDWF NewSample,W
IORWF DebouncedSample,F
ENDM
;**************************************************************************
; Program Start
;**************************************************************************
; Reset Vector
ORG H'00'
; For the sole purpose of squeezing every last byte of the programming mem
; I actually use the 3 program positions before the interrupt vector
; before jumping to the main program. Take note though that
; ONLY 3 instructions are allowed before the jump to main loop !!
BANK0
CLRF PCLATH
CLRF INTCON
GOTO INIT
;**************************************************************************
; Interrupt routine
; An humongously big int handler here ;-)
; but the keyboard handling is FULLY in the background, without any intervention
; in the main loop whatsoever. I like the solution anyway.
;
;**************************************************************************
; Interrupt vector
ORG H'04'
INT
PUSH ; Save registers and set to BANK 0
BTFSS INTCON,T0IF ; check if TMR0 interrupt
GOTO INTX ; whoops ! 'unknown' int, should be disabled...
; NOTE ! if an 'unknown' int triggers the int routine
; the program will loop here for ever ;-) ( as the calling flag is not cleared )
;+++
; Timer (TMR0) timeout either heart beat or tx/rx mode
; In 'heart beat mode' we monitor the clock and data lines
; at ( roughly )= 0.5 ms interval, we also check the send buffer
; if there are any keys to send to pc ( if clock/data levels allows us to )
; In tx/rx mode we are controlling the clock/data line = 27 us tick
; Note: This software works using both 8Mhz and 10Mhz resonators without modifications
; however the 'timing' will then of course be 'off'.
INT_CHECK
BCF INTCON,T0IF ; Clear the calling flag !
BTFSC _TX_Mode ; check if we are in tx mode
GOTO INT_TX ; yep, goto tx mode code..
BTFSC _RX_Mode ; are we in rx mode ?
GOTO INT_RX ; yep goto rx mode code
GOTO INT_HEART_BEAT ; nope just goto 'heart beat' mode
;*************** TX code start ***********************************
INT_TX
MOVLW H'FA' ; preset timer with 252 ( 256 - 6 = 250 )
; timetick = 0.4uS x 8 ( prescale ) x 6 + 8us ( int handling code )= 27 us
MOVWF TMR0
BTFSS clkCount,0 ; check if we should toggle clock
GOTO INT_DEC_CLOCK ; bit low,decrement and check if we should toggle data instead
DECFSZ clkCount,F ; decrement and check if we are at zero..
GOTO INT_CLOCK ; not zero then toggle clock line
GOTO INT_EXIT_TX
INT_CLOCK
BTFSC pcCLOCK_out ; check if we are low
GOTO INT_CLOCK_HIGH ; yep set to high
BTFSS pcCLOCK_in ; check if pc is pulling the clock line low
; i.e. it wants to abort and send instead..
GOTO INT_TX_CHECK_ABORT ; abort this transfer
BSF pcCLOCK_out ; ok to set clock low ( pull down )
GOTO INTX
INT_CLOCK_HIGH
BCF pcCLOCK_out ; set high ( release line )
;BCF _ClockHigh ;
GOTO INTX
INT_TX_CHECK_ABORT
GOTO INT_EXIT_TX
INT_DEC_CLOCK
DECF clkCount,F ; decrement clock counter ( so we toggle next time )
INT_DATA
BTFSS bitCount,0 ; check bit counter
GOTO INT_DATA_IDLE ; no data toggle
DECFSZ bitCount,F ; decrement bit counter
GOTO INT_DATA_NEXT ; next bit..
INT_NO_BITS
BSF bitCount,0 ; just in case ( stupid code, not sure its needed, just
; to make it impossible to overdecrement )***
BTFSC _isParity ; are we sending parity ?
GOTO INT_DATA_END ; exit
; all bits sent
; delete the last key from the buffer
CALL INC_KEY_HEAD ; remove the ( last ) key form the buffer as is was sent ok..
; all bits sent check parity
BSF _isParity ; set flag data is parity
BTFSS KeyParity, 0 ; is the last parity bit high? ( odd num of bits )
; then parity should be high ( free )
GOTO INT_DATA_HIGH_PAR ; yes
BSF pcDATA_out ; no, parity should be 'low' ( pulled down )
GOTO INTX ;
INT_DATA_HIGH_PAR:
BCF pcDATA_out ; set parity bit high ( release data line )
GOTO INTX ; and exit..
INT_DATA_END
BTFSS _isStopBit ; is the stopbit sent ?
GOTO INT_DATA_STOPB ; nope then set stopbit flag
BCF pcDATA_out ; parity bit sent, always release data line ( stop bit )
GOTO INTX
INT_DATA_STOPB
BSF _isStopBit ; set the stopbit flag
GOTO INTX ; and exit
INT_DATA_IDLE
DECF bitCount,F ; decrement bit counter
GOTO INTX ; no toggle of data line
INT_DATA_NEXT
BTFSS CurrKey,0 ; is the last bit of the key_buffer high?
GOTO INT_DATA_LOW ; no, pull data low
BCF pcDATA_out ; yes, release data line
INCF KeyParity,F ; increment parity bit
GOTO INT_DATA_ROTATE ; rotate data
INT_DATA_LOW ; last bit is low
BSF pcDATA_out ; set the bit
INT_DATA_ROTATE
RRF CurrKey,F ; rotate right by 1 bit
GOTO INTX
INT_EXIT_TX
; setup the timer so we accomplish an delay after an tx seq
BCF _TX_Mode ; clear tx mode flag
BCF pcCLOCK_out ; release clock line
BCF pcDATA_out ; and data line
;
MOVLW H'64' ; start timer with 100 ( 256-100 = 156 )
; timetick = 0.4uS x 8 ( prescale ) x 156 = (roufly) 0.5 mS
MOVWF TMR0
GOTO INTX
;************** TX code end *****************
;************** RX code start ***************
INT_RX
MOVLW H'FA' ; preset timer with 252 ( 256 - 6 = 250 )
; timetick = 0.4uS x 8 ( prescale ) x 6 + 8us ( int handling code )= 27 us
MOVWF TMR0
BTFSS clkCount,0 ; check if we should toggle clock
GOTO INT_RX_DEC_CLOCK ; bit low,decrement and check if we should read data instead
DECFSZ clkCount,F ; decrement and check if we are at zero..
GOTO INT_RX_CLOCK ; not zero then toggle clock line
BCF pcCLOCK_out ; release the clock line we are done..
BCF _RX_Mode ; clear rx mode bit ( go over to heart beat mode )
GOTO INT_EXIT_RX
INT_RX_CLOCK
BTFSC pcCLOCK_out ; check if we are low
GOTO INT_RX_CLOCK_HIGH ; yep set to high ( release line )
BTFSC _isStartBit ; check if this is the first bit ( start )
GOTO INT_RX_START ; clear start bit and continue
BTFSC _isParity ; check if this is the parity bit ( or parity has been received )
GOTO INT_RX_PAR ; yep check parity
GOTO INT_RX_BIT ; ok just a 'normal' bit read it
INT_RX_PAR ; check parity
BTFSC _doRXAck ; check the handshake flag
GOTO INT_RX_HNDSHK ; start handshake check
BTFSS pcDATA_in ; is the input high ?
GOTO INT_RX_PAR_HIGH ; yep
BTFSC KeyParity,0 ; is the parity '0' ( should be )
GOTO INT_RX_PAR_ERR ; nope parity error
GOTO INT_RX_ACK ; parity ok next should be ack ( we take data line low )
INT_RX_PAR_HIGH
BTFSS KeyParity,0 ; check that parity bit is '1'
GOTO INT_RX_PAR_ERR ; nope parity error
GOTO INT_RX_ACK ; parity ok, next is ack ( we take data line low )
INT_RX_PAR_ERR
BSF _KeyError ; set error flag
INT_RX_ACK
BSF pcCLOCK_out ; ok to set clock low ( pull down )
BSF _doRXAck ; enable ack check
GOTO INTX
INT_RX_HNDSHK
BTFSS _RXEnd ; if we are done dont take data low
BSF pcCLOCK_out ; ok to set clock low ( pull down )
BTFSC _RXAckDone ; chek if hand shake ( ack ) is done ?
BSF _RXEnd ; ok we are now done just make one more clock pulse
GOTO INTX ; exit
INT_RX_CLOCK_HIGH
BCF pcCLOCK_out ; set high ( release line )
BTFSS _RXAckDone ; are we done.. ?
GOTO INTX
BTFSS _RXDone ; finished ?
GOTO INTX
BCF _RX_Mode ; and clear rx flag..
GOTO INT_EXIT_RX ; bye bye baby
INT_RX_DEC_CLOCK
DECF clkCount,F ; decrement clock counter ( so we toggle next time )
BTFSS _doRXAck ; check if we are waiting for handshake
GOTO INTX
BTFSC pcCLOCK_out ; check if the clock is low ( pulled down )
GOTO INTX ; nope we are pulling down then exit
; we only take over the data line if
; the clock is high ( idle )
; not sure about this though.. ???
BTFSC _RXEnd ; are we done ?
GOTO INT_RX_END
; handshake check if data line is free ( high )
BTFSS pcDATA_in ; is data line free ?
GOTO INTX ; nope
BSF pcDATA_out ; takeover data line
BSF _RXAckDone ; we are done..at next switchover from low-high we exit
GOTO INTX ;
INT_RX_END
BCF pcDATA_out ; release data line
BSF _RXDone ; we are now done
GOTO INTX
INT_RX_START
BCF _isStartBit ; clear start bit flag
BSF pcCLOCK_out ; ok to set clock low ( pull down )
GOTO INTX
INT_RX_BIT
BCF CurrKey,7
BTFSS pcDATA_in ; is bit high
GOTO INT_RX_NEXT ; nope , it's a '0'
BSF CurrKey,7 ; set highest bit to 1
INCF KeyParity,F ; increase parity bit counter
INT_RX_NEXT
BSF pcCLOCK_out ; ok to set clock low ( pull down )
DECFSZ bitCount,F ; decrement data bit counter
GOTO INT_RX_NEXT_OK
BSF bitCount,0 ; just in case ( so we cannot overdecrement )
BSF _isParity ; next bit is parity
GOTO INTX
INT_RX_NEXT_OK
CLRC ; clear carry, so it doesnt affect receving byte
RRF CurrKey,F ; rotate to make room for next bit
GOTO INTX ; and exit
INT_EXIT_RX
; handle the recevied key ( if not it is an 'data' byte )
MOVLW H'C4' ; preset timer with 196 ( 256 - 60 = 196 )
; timetick = 0.4uS x 8 ( prescale ) x 60 + 8 ( int handling code )= 200 us
;
MOVWF TMR0 ; this delay seems to be needed ( handshake ? )
; check if this is an data byte ( rate/delay led status etc )
MOVF CommandData,F ; reload into itself ( affect zero flag )
BTFSS STATUS,Z ; check zero flag
GOTO INT_STORE_DATA ; byte contains data ( rate/delay etc )
CALL CHECK_RX_KEY ; no data, handle recevied command
GOTO INTX
INT_STORE_DATA
; store data byte in 'currkey',
; first reply with 'ack'
MOVLW H'FA' ; keyboard ack
CALL ADD_KEY ;
BTFSS _IsLedStatus ; is it led status byte ?
GOTO INT_STORE_RATE ; nope check next
INT_STORE_NUM
; byte in 'currkey' is led status byte, store it
MOVF CurrKey,W ; get byte
MOVWF KbLedStatus ; and store it
BTFSC _WaitNumLock ; was this something we were waiting for ?
; i.e. we sent the make scancode for numlock.
CALL RELEASE_NUMLOCK ; yep, then send release code for 'soft' numlock
GOTO INT_STORE_EXIT ; store it in local ram copy and exit
INT_STORE_RATE
BTFSS _IsRateDelay ; is it rate/delay byte ?
GOTO INT_STORE_EXIT ; nope then send ack end exit
; byte in 'currkey' is rate/delay byte, store it
MOVF CurrKey,W ; get byte
MOVWF KbRateDelay ; and store it
INT_STORE_EXIT
CLRF CommandData ; clear data byte flags
GOTO INTX
;******************* 'heart' beat code ( 0.5 ms tick ) *********
; Note: As I 'mess' with the int timer this 'heart beat' is by no means
; an accurate clock. However it can work as a rough estimate for local time.
;
INT_HEART_BEAT
MOVLW H'64' ; start timer with 100 ( 256-100 = 156 )
; timetick = 0.4uS x 8 ( prescale ) x 156 = (roufly) 0.5 mS
MOVWF TMR0
INT_CHECK_CLKDTA:
; CLOCK DATA Action
;-----------+--------
; L L | wait ?
; L H | wait, buffer keys
; H L | start an rx sequence
; H H | keyboard can tx
BTFSS pcDATA_in ; is the data line high ( free )..
GOTO INT_CHECK_RX ; Nope it's pulled down, check if rx is requested
BTFSC pcCLOCK_in ; Is the clk line low ( pulled down ) ?
GOTO INT_CHECK_BUFF ; Nope, so check if we have any keys to send
GOTO INT_IDLE ; clock is low , wait and buffer keys( i.e. no rx/tx )
INT_CHECK_RX ; pc ( probably ) wants to send something..
BTFSS pcCLOCK_in ; wait until clock is released before we go into receving mode..
GOTO INT_RX_IDLE ; nope still low
; clock now high test if we are set to start an rx seq.
BTFSS _RxCanStart ; have we set the flag ?
GOTO INT_WAIT_RX ; nope then set it
BTFSC pcDATA_in ; make sure that data still is low
GOTO INT_ABORT_RX ; nope abort rx req, might been a 'glitch'
; initiate the rx seq.
CLRF Comm_Flags ; used by both tx/rx routines ( and _RxCanStart bit !! )
CLRF TRX_Flags ; clear tx/rx flags
CLRF KeyParity ; clear parity counter
BSF _RX_Mode ; set rx mode flag..
BSF _isStartBit ; set that next sampling is start bit
; preset bit and clock counters
MOVLW H'2F' ; = 47 dec, will toggle clock output every even number until zero
MOVWF clkCount ; preset clock pulse counter
MOVLW H'08' ; = 8 dec, number of bits to read
; then parity bit will be set instead
MOVWF bitCount ; preset bit counter
; note as we are starting the clock here we allow a longer time before we start
; the actual 20 us tick, this the first time we wait about 200 us before the first clock 'tick'
MOVLW H'C4' ; preset timer with 196 ( 256 - 60 = 196 )
; timetick = 0.4uS x 8 ( prescale ) x 60 + 8us ( int handling code )= 200 us
;
MOVWF TMR0
GOTO INTX ; exit, the next int will start an rx seq
INT_WAIT_RX:
BSF _RxCanStart ; set flag so we start rx next int ( 0.5 ms )
INT_RX_IDLE
; reload clock so we check more often
MOVLW H'F0' ; start timer with 240 ( 256-16 = 240 )
; timetick = 0.4uS x 8 ( prescale ) x 16 + 8/10us ( int handling code )= (about) 60 us
MOVWF TMR0
GOTO INTX ;
INT_ABORT_RX
BCF _RxCanStart ; clear flag ( forces a 'new' rx start delay )
GOTO INT_IDLE ;
INT_CHECK_BUFF:
; check if we have any keys to send to pc
MOVF KeyBufferTail,W ; get end of buffer to 'w'
SUBWF KeyBufferHead,W ; subtract start of buffer if head - tail = zero, no byte
BTFSC STATUS, Z ; zero flag = no byte to send
GOTO INT_IDLE ; then do the 'idle' stuff
INT_SEND_KEY
;key in buffer, get it and initiate an tx seq...
CALL GET_KEY_BUFFER ; get the key into CurrKey
MOVF CurrKey,W
MOVWF LastKey ; store last sent key
; setup our tx/rx vars
CLRF Comm_Flags ; used by both tx/rx routines ( and _RxCanStart bit !! )
CLRF TRX_Flags ; clear tx/rx flags
CLRF KeyParity ; clear parity counter
BSF _TX_Mode ; set tx mode flag..
; preset bit and clock counters
MOVLW H'2B' ; = 43 dec, will toggle clock out put every even number until zero
MOVWF clkCount ; preset clock pulse counter
MOVLW H'12' ; = 18 dec, will shift data out every even number until zero
; then parity bit will be set instead
MOVWF bitCount ; preset bit counter
; data now set, initiate the clock to generate a 20 us tick ( rx/tx heart beat )
BSF pcDATA_out ; start bit, always 'low' ( we pull down )
MOVLW H'FA' ; start timer with 252 ( 256-6 = 250 )
; timetick = 0.4uS x 8 ( prescale ) x 6 + 8 ( int handling code )= 27 us
MOVWF TMR0
GOTO INTX ; exit, the next int will start an tx
INT_IDLE:
; 'Idle' code i.e. no rx or tx possible AND/OR nothing to send
DECF Divisor_10ms,F ; Count 0.5ms down to give 10 milli second tick
BNZ INTX ; Exit if divider not zeroed
MOVLW .20
MOVWF Divisor_10ms ; Preset the divide by 20
;+++
; 10 ms tick here
; Divide the 10 ms tick to give 100 ms second tick
INT_10MS
DECF Divisor_100ms,F ; Count 10ms down to give 100 milli second tick
BNZ INTX ; Exit if divider not zeroed
MOVLW .10
MOVWF Divisor_100ms ; Preset the divide by 10
;+++
; 100 ms tick here
INT_100MS
; numlock check !! bit variable _Numlock does not actually set the numlock status directly.
; However, by setting this bit to '1' we make a test against the current numlock led status
; ( bit no 1 in variable KbLedStatus ), if that is different from this variable
; we send a 'numlock' press/release ( to toggle numlock status )
; so in essence, setting this bit to '1' will force numlock to be 'on' etc.
BTFSC _IsFirstLedStatus ; if = 1 then we have not yet received numlock status
GOTO INT_REPEAT_CHECK ; nope, then this is a consecutive byte, store as 'normal'
BTFSS _WaitNumLock ; are we waiting for pc numlock reply ?
GOTO INT_NUMLOCK_CHECK ; yep then do repeat check instead
DECFSZ Temp_Var,F ;
GOTO INT_REPEAT_CHECK
CALL RELEASE_NUMLOCK
INT_NUMLOCK_CHECK
BTFSC _LedNumLock ; is the led on ?
GOTO INT_NUMLOCK_ON ; yep, then test our 'local' numlock state ( wanted numlock state )
; nope numlock is off, is our wanted state also off ?
BTFSS _NumLock ; is wanted state off ?
GOTO INT_REPEAT_CHECK ; yep continue
CALL PRESS_NUMLOCK ; nope then send numlock press/release code
GOTO INT_REPEAT_CHECK
INT_NUMLOCK_ON
BTFSC _NumLock ; is wanted state also 'on' ?
GOTO INT_REPEAT_CHECK ; yep
CALL PRESS_NUMLOCK ; nope then toggle numlock state
INT_REPEAT_CHECK
; check if a key should be 'repeated' ( when pressed longer than 500 ms )
BTFSS _startRepeat ; start repeating a key ? ( delay !!! )
GOTO INT_CHECK_KEY ; nope, then check if key should be repeated
DECF RepeatTimer,F ;
BNZ INT_500MS ; not zero yet, check timer instead
BCF _startRepeat ; stop repeat timer ( delay is accomplished )
BSF _doRepeat ; and enable 'key' is still down check
MOVLW .02 ; start repeat send timer
MOVWF Divisor_Repeat ;
GOTO INT_500MS ; do next timer check
INT_CHECK_KEY
BTFSS _doRepeat ; key should be repeated ?
GOTO INT_500MS ; nope
; ok key should be repeated, check if it still pressed ?
CALL CHECK_KEY_STATE ; uses MakeKeyOffset to calculate which key that was
; the last pressed, and then check if it's still pressed
; if still pressed carry = '1',
BTFSS STATUS,C ; check carry
BCF _doRepeat ; clear repeat bit, stop repeating the key
BTFSS _doRepeat ; still pressed ?
GOTO INT_500MS ; nope
DECF Divisor_Repeat,F ; should we send the key ?
BNZ INT_500MS ; nope
MOVLW DELAY_RATE ; reload timer with key rate delay
;MOVLW .02 ; restart timer
MOVWF Divisor_Repeat ;
BSF _doSendKey ; set flag to send key, NOTE the actual sending ( putting into send buffer )
; is done inside mainloop.
INT_500MS
DECF Divisor_500ms,F ; Count 100ms down to give 500 milli second tick
BNZ INTX ; Exit if divider not zeroed
MOVLW .05
MOVWF Divisor_500ms ; Preset the divide by 5
;+++
; 500 ms tick here
INT_500_NEXT
TOGGLE_PIN O_led_KEYCOMM_ok ; toggle the disco light ;-)
BTFSS _DoExitAltKeymap ; is the alt keymap toggle key pressed the second time ?
; if so skip timeout test and exit
BTFSS _InAltKeymap ; are we in altkeymap ?
GOTO INTX ; nope
; we are in altkeymap, decrement the lastkeytime
; and check if we are at zero then we exit
; the altkeymap.
DECF LastKeyTime,F ; decrease time
BNZ INTX ; exit, timer has not expired
; timer expired, get out of altkey map
BSF _ExitAltKeymap ;
; ***************** 'heart' beat code end ***************
INTX
;BCF INTCON,T0IF ; Clear the calling flag
PULL ; Restore registers
RETFIE
; **************** end interrupt routine **************
;+++++
; Routines that will 'toggle' keyboard numlock status
; by sending numlock make/break code
;
PRESS_NUMLOCK:
MOVLW H'77' ; numlock key scancode, make
CALL ADD_KEY
MOVLW H'06' ; 6 x 100 ms = 600 ms ( release delay )
MOVWF Temp_Var ;
BSF _WaitNumLock ; we are waitin for numlock status reply from pc
RETURN
RELEASE_NUMLOCK:
MOVLW BREAK ; break prefix
CALL ADD_KEY
MOVLW H'77' ; numlock key scancode
CALL ADD_KEY
BCF _WaitNumLock
RETURN
; ***********************************************************************
;
; CHECK_RX_KEY - handles the received commands from pc
;
CHECK_RX_KEY
; check the key in 'currkey' ( command from pc )
CHECK_ED
MOVF CurrKey,W ; move key buffer into W register
SUBLW H'ED' ; subtract value in W with 0xED
BTFSS STATUS, Z ; check if the zero bit is set
GOTO CHECK_EE ; the result of the subtraction was not zero check next
; ok 'ED'=set status leds ( in next byte ) received
BSF _IsLedStatus ; set bit that next incoming byte is kb led staus
GOTO CHECK_SEND_ACK ; send ack
CHECK_EE
MOVF CurrKey,W ; move key buffer into W register
SUBLW H'EE' ; subtract value in W with 0xEE
BTFSS STATUS, Z ; check if the zero bit is set
GOTO CHECK_F0 ; the result of the subtraction was not zero check next
; ok 'EE'= echo command received
GOTO CHECK_SEND_EE ; send echo
CHECK_F0
MOVF CurrKey,W ; move key buffer into W register
SUBLW H'F0' ; subtract value in W with 0xF0
BTFSS STATUS, Z ; check if the zero bit is set
GOTO CHECK_F2 ; the result of the subtraction was not zero check next
; ok 'F0'= scan code set ( in next commming byte ) received
BSF _SkipByte ; skip next incomming byte ( or dont interpret )
GOTO CHECK_DONE ; do not send ack !
CHECK_F2
MOVF CurrKey,W ; move key buffer into W register
SUBLW H'F2' ; subtract value in W with 0xF0
BTFSS STATUS, Z ; check if the zero bit is set
GOTO CHECK_F3 ; the result of the subtraction was not zero check next
; ok 'F2'= Read ID command responds with 'AB' '83'
GOTO CHECK_SEND_ID ; send id bytes
CHECK_F3
MOVF CurrKey,W ; move key buffer into W register
SUBLW H'F3' ; subtract value in W with 0xF3
BTFSS STATUS, Z ; check if the zero bit is set
GOTO CHECK_FE
; GOTO CHECK_F4 ; the result of the subtraction was not zero check next
; ok 'F3'= set repeat rate ( in next commming byte ) received
BSF _IsRateDelay ; next incomming byte is rate/delay info
GOTO CHECK_SEND_ACK ; send ack
; **** Note ! removed from test as I 'don't care' ********
; **** i.e. I dont disable or enable the keyboard at any time.
;CHECK_F4
; MOVF CurrKey,W ; move key buffer into W register
; SUBLW H'F4' ; subtract value in W with 0xF4
; BTFSS STATUS, Z ; check if the zero bit is set
; GOTO CHECK_F5 ; the result of the subtraction was not zero check next
; ok 'F4'= keyboard enable received
; GOTO CHECK_SEND_ACK ; send ack
;CHECK_F5
; MOVF CurrKey,W ; move key buffer into W register
; SUBLW H'F5' ; subtract value in W with 0xF5
; BTFSS STATUS, Z ; check if the zero bit is set
; GOTO CHECK_FE ; the result of the subtraction was not zero check next
; ok 'F5'= keyboard disable received
; GOTO CHECK_SEND_ACK ; send ack
CHECK_FE
MOVF CurrKey,W ; move key buffer into W register
SUBLW H'FE' ; subtract value in W with 0xFE
BTFSS STATUS, Z ; check if the zero bit is set
GOTO CHECK_FF ; the result of the subtraction was not zero check next
; ok 'FE'= resend last sent byte
MOVF LastKey,W ; get last key
CALL ADD_KEY ; and put it on the que
GOTO CHECK_DONE
CHECK_FF
MOVF CurrKey,W ; move key buffer into W register
SUBLW H'FF' ; subtract value in W with 0xFF
BTFSS STATUS, Z ; check if the zero bit is set
GOTO CHECK_ERROR ; the result of the subtraction was not zero, unknown command
; ok 'FF'= reset keyboard received
GOTO CHECK_SEND_AA ; send 'AA' power on self test passed
CHECK_ERROR ; unknown command ( or command not interpreted )
GOTO CHECK_SEND_ACK
CHECK_SEND_ID
MOVLW H'FA' ; keyboard ack
CALL ADD_KEY ;
MOVLW H'AB' ; keyboard id first byte, always 0xAB
CALL ADD_KEY ;
MOVLW H'83' ; keyboard id second byte, always 0x83
CALL ADD_KEY ;
GOTO CHECK_DONE
CHECK_SEND_ACK
MOVLW H'FA' ; keyboard ack
CALL ADD_KEY ;
GOTO CHECK_DONE
CHECK_SEND_AA
MOVLW H'FA' ; keyboard ack
CALL ADD_KEY ;
MOVLW H'AA' ; keyboard post passed
CALL ADD_KEY ;
GOTO CHECK_DONE
CHECK_SEND_EE
MOVLW H'EE' ; keyboard echo
CALL ADD_KEY ;
CHECK_DONE
RETLW 0 ; and we are done
; ***********************************************************************
; Buffer code ( a bit modified ) from Stewe Lawther
; http://ourworld.compuserve.com/homepages/steve_lawther/ucindex.htm
; And of course source of the exellent keyboard viewer. !! ( without which, this
; project would have been close to impossible ) ( and of course my nifty
; memory oscilloscope )
;
; ADD_KEY_BUFFER - (outside int)add the key in CurrKey to our keybuffer que in the first
; free position. If there is no more room the oldest byte is
; 'dumped'.
; ADD_KEY - Same but to be used inside int routine.( just skips int disable code )
ADD_KEY_BUFFER
ADD_STOP_INT ; first stop all interrupts !!!!!!!
BCF INTCON,GIE ; disable global interrupts..
BTFSC INTCON,GIE ; check that is really was disabled
GOTO ADD_STOP_INT ; nope try again
ADD_KEY ; inside interuppt we call this instead ( as we dont need to disable int :-) )
MOVWF BufTemp ; store key temporary
MOVF KeyBufferHead,W ; move buffer head out of FSR temporarily
MOVWF Temp ; store in temp
MOVF KeyBufferTail,W ; set FSR to buffer tail
MOVWF FSR ; set indirect file pointer
MOVF BufTemp,W ; set W to new scancode to send
MOVWF INDF ; and put it in the buffer
MOVF Temp,W ; get the head pointer back
MOVWF KeyBufferHead ;
INCF KeyBufferTail,W ; get the end of the buffer
SUBLW KbBufferMax ; check if at buffer max
INCF KeyBufferTail,W ; (reload value to w - doesn't affect C)
BTFSS STATUS, C ; if so (negative result)
MOVLW KbBufferMin ; set to buffer min ( wrap around )
MOVWF KeyBufferTail
SUBWF KeyBufferHead,W ; see if we have any room ( head and tail have meet )
BTFSC STATUS, Z ; if so (Z set)
CALL INC_KEY_HEAD ; dump oldest byte
; finally turn on interrupts again
MOVLW b'10100000' ; enable global & TMR0 interrupts
MOVWF INTCON
RETURN
; ***********************************************************************
;
; GET_KEY_BUFFER - Gets a char from the buffer, and puts it into KeyBuffer
; NOTE: Does not increase buffer pointers ( dump this key ).
; A call to INC_KEY_HEAD will do this if the key is sent ok
GET_KEY_BUFFER
MOVF INDF, W ;put the byte to send into key buffer
MOVWF CurrKey
RETURN ; and go back, NOTE ! the key is not
; removed from the buffer until a call
; to INC_KEY_HEAD is done.
; ***********************************************************************
;
; INC_KEY_HEAD - dump oldest byte in keybuffer, Do not call if byte
; has not been fetched before ( GET_KEY_BUFFER )
;
INC_KEY_HEAD INCF KeyBufferHead,W ; set to next byte in buffer
SUBLW KbBufferMax ; check if at buffer max
INCF KeyBufferHead,W ; (reload value to w - doesn't affect C)
BTFSS STATUS, C ; if so (negative result)
MOVLW KbBufferMin ; set to buffer min ( wrap around )
MOVWF KeyBufferHead ; and store ( in FSR )
RETURN ; go back
; ***********************************************************************
;
; CHECK_KEY_STATE - Check if the last pressed key is still pressed
; Returns with carry = '1' if still pressed
; else carry = '0' ( or error )
;
CHECK_KEY_STATE:
; uses LastMakeOffset to calculate which key to test
MOVF LastMakeOffset,W ; get offset
ANDLW H'18' ; mask out column bits
; lastmake offset has the following bits:
; '000yyxxx' where 'yy' is column no
; and 'xxx' is key num,
BTFSC STATUS,Z ; zero = column 1 & 2
GOTO CHECK_COL_12 ; it is in column 1
MOVWF repTemp ; save it temporary
SUBLW H'08' ; subtract value in W with 0x08 ( columns 3 & 4 )
BTFSC STATUS, Z ; check if the zero bit is set
GOTO CHECK_COL_34 ; it is in column 3 & 4
MOVF repTemp,W ; get the column bits back
SUBLW H'10' ; subtract value in W with 0x10 ( columns 5 & 6 )
BTFSC STATUS, Z ; check if the zero bit is set
GOTO CHECK_COL_56 ; it is in column 5 & 6
CHECK_COL_78
MOVF kbColumn78_Old,W ; get bit map ( key status ) for keys in column 7 & 8
MOVWF repKeyMap ; and store it
GOTO CHECK_KEY ; and continue to check bit
CHECK_COL_56
MOVF kbColumn56_Old,W ; get bit map ( key status ) for keys in column 5 & 6
MOVWF repKeyMap ; and store it
GOTO CHECK_KEY ; and continue to check bit
CHECK_COL_34
MOVF kbColumn34_Old,W ; get bit map ( key status ) for keys in column 3 & 4
MOVWF repKeyMap ; and store it
GOTO CHECK_KEY ; and continue to check bit
CHECK_COL_12
MOVF kbColumn12_Old,W ; get bit map ( key status ) for keys in column 1 & 2
MOVWF repKeyMap ; and store it
;<-------Alt keymap code------->
;Checks ONLY column 1&2 bitmap ( keymap ) ( as it is now )
; this code has to be moved/changed if another column is choosen as the alt. keymap toggle key
; alternative keymap handling if key r3 c1 is pressed ( bit 2 in column 1&2 )
; then enable alternative keymap ( only if keyrepeat is disabled )
; check if this was the last key pressed
; check bit representing the alt. keymap key ( i've choosen key 2 )
MOVF LastMakeOffset,W ; get key offset again
ANDLW H'07' ; mask out column bits
SUBLW H'02' ; check if its bit num 2 ( the enter 'alt keymap' key )
BTFSS STATUS, Z ; check if the zero bit is set GOTO CHECK_KEY ; nope than another key was the last
; skip altkeymap enable
; the altkeymap key was the last pressed !
; is key repeat disabled ?
BTFSS I_jmp_NoRepeat ; check if repeat code is enabled ?
GOTO CHECK_KEY ; yep, then skip altkeymap enable test
; enable altkeymap if key is still pressed
BTFSC repKeyMap,2 ; test bit 2 ( should be key 'F7' )
GOTO CHECK_ENABLE_ALT ; ok enable altkeymap ( if we are not already in altkeymap )
GOTO CHECK_KEY ; nope another key in column 1&2 continue check
CHECK_ENABLE_ALT
BTFSC _AltKeymap ; are we already in altkeymap ?
GOTO CHECK_KEY ; yep then just continue
; We are just entering/enabling the alt. keymap
BSF _AltKeymap ; enable alternative keymap
; Example of using an 'advanced' alt keymap handling
; not enabled, to avoid intial confusion.
; I.E This snippet would only be called once when we
; are just entering(enabling) the alternative keymapping !
; This example code will 'soft' release the current altkeymap key ( it is in pressed state ! )
; ( i.e send release code for the enter alt. keymap key 'F7' )
; send the make scancode for left <alt> key instead.
; and force numlock to be off.
; Do not use if you dont understand the implifications !
; Also note that the scancodes are hardcoded here !
; ( i.e do not use the lookup table definition of the key/s )
; ***** start snippet
;MOVLW BREAK ; send break prefix
;CALL ADD_KEY
;MOVLW H'83' ; and scancode for the enter alt keymap
;CALL ADD_KEY
;MOVLW H'11' ; send make code for the left <alt> key
;CALL ADD_KEY
; example of forcing the numlock status to a particular state
; the numlockstatus will change ( be checked ) inside the int routine
; See also at the end of KB_DEBOUNCE_12 where the numlock status
; will be restored when we release the key
;BCF _NumLock ; 'force' numlock to be off
; This bit MUST also be checked as we do not know if we have recevied
; first numlock status byte yet ( pc does not send numlock/led status
; after intial poweron, if not one of the numlock/capslock/scrolllock are pressed )
; i.e. if you connect this keyboard to a 'running' pc, the numlock status
; will be unknown.However if connected before poweron, it will be updated
; as numlock status is sent during pre-boot seq.
;BTFSC _IsFirstLedStatus ; have we recevied numlock status yet ?
;CALL PRESS_NUMLOCK
; ***** end snippet
CHECK_KEY
; 'normal' key down check
; column for pressed key is now in repKeyMap
MOVF LastMakeOffset,W ; get offset again
ANDLW H'07' ; mask out key number ( lowest 3 bits )
BTFSC STATUS,Z ; bit num zero ?
GOTO CHECK_KEY_DONE ; yep lowest bit, check and return
MOVWF repTemp ; and store it
CHECK_KEY_LOOP
RRF repKeyMap,F ; rotate one step to right
DECFSZ repTemp,F ; decrement bit counter
GOTO CHECK_KEY_LOOP ; loop again
CHECK_KEY_DONE
; ok the key to test should now be the lowest bit in repKeyMap
CLRC ; clear carry
BTFSC repKeyMap,0 ; check bit 0
BSF STATUS,C ; ok key is pressed set carry
RETURN ; and we are done..
; ***********************************************************************
;
; DELAY_1ms - Delay routine ! used when scanning our own keyboard
; Delay is between output of adress to 4051 and reading of inputs
; Increase to have a slower 'scan' rate or decrease to have a higher scan rate.
;
DELAY_1ms
MOVLW H'F0' ; wait 255 cycles
MOVWF kbTemp ; this var is 'safe' to be used in side mainloop
MOVLW H'03'
MOVWF kbState
DELAY_LOOP
DECFSZ kbTemp,F ; decrement
GOTO $-1 ;
MOVLW H'F0'
MOVWF kbTemp
DECFSZ kbState,F
GOTO DELAY_LOOP
RETURN
;---------------------------------------------------------------------------
;
; Initialisation
;
;---------------------------------------------------------------------------
INIT:
;+++
; Set up the ports
; PORT A
BANK1
MOVLW b'00000110' ; Set port data directions RA1,RA2 inputs RA0,RA3,RA4 outputs
MOVWF TRISA ; PC keyboard connections
; PORT B
; Used for our own 3x8 matrix keyboard
BANK1
MOVLW b'11111000' ; Set port data directions RB4-RB7 inputs rest outputs
MOVWF TRISB
; Clear all registers on bank 0 ( memory )
BANK0
MOVLW H'0C'
MOVWF FSR
INITMEM
CLRF 0 ; Clear a register pointed to be FSR
INCF FSR,F
CLRWDT ; clear watchdog
MOVLW H'50' ; Test if at top of memory
SUBWF FSR,W
BNZ INITMEM ; Loop until all cleared
;+++
; Initiate the keybuffer pointers
INIT_BUFF:
MOVLW KbBufferMin ; get adress of first buffer byte
MOVWF KeyBufferHead ; store in FSR
MOVWF KeyBufferTail ; and set last byte to the same ( no bytes in buffer )
;+++
; Preset the timer dividers
MOVLW .20
MOVWF Divisor_10ms
MOVLW .10
MOVWF Divisor_100ms
MOVLW .05
MOVWF Divisor_500ms
;+++
; Set up Timer 0.
; Set up TMR0 to generate a 0.5ms tick
; Pre scale of /8, post scale of /1
BANK1
MOVLW b'00000010' ; Initialisation of TMR0 prescale 8 '010'
; weak pullup enabled by latch values.
MOVWF OPTION_REG ; load option reg with prescale of 8
BANK0
MOVLW H'64' ; start timer with 100 ( 256-100 = 156 )
; timetick = 0.4uS x 8 ( prescale ) x 156 = (roufly) 0.5 mS
MOVWF TMR0
;---------------------------------------------------------------------------
;
; the main 'program' loop ( starts really at MAIN_LOOP )
;
;---------------------------------------------------------------------------
MAIN:
BSF pcDATA_in
BSF pcCLOCK_in
BCF pcDATA_out
BCF pcCLOCK_out
CLRF PORTB
MOVLW H'08' ; preset the column counter
MOVWF kbColumnCnt ;
BSF _NumLock ; default state is numlock = on
BSF _IsFirstLedStatus ; we have not yet recevied led status byte.
MOVLW b'10100000' ; enable global & TMR0 interrupts
MOVWF INTCON
CLRWDT ; clear watchdog
BTFSS O_led_KEYCOMM_ok
GOTO $-2 ; make an 0.5 second delay here
; i.e. the led will come on when 0.5 seconds has passed
; set inside the timer int.
CLRWDT ; clear watchdog
BTFSC O_led_KEYCOMM_ok
GOTO $-2 ; make an additional 0.5 second delay here
; i.e. the led will be dark when 0.5 seconds has passed
; set inside the timer int.
MOVLW H'AA' ; post passed :-), always 0xAA
CALL ADD_KEY_BUFFER
; now go into infinite loop, the pc kb interface runs in the background ( as an int )
; where we continuously monitor the pcCLOCK/DATA_in lines
MAIN_LOOP:
; check whatever :-)
CLRWDT ; clear watchdog
MAIN_CHECK_COL_1:
; scan our own keyboard, first four bits
; address and read column, read as complement so key pressed = '1'
; since we pull down when key is pressed ( weak pullup enabled )
; ( i.e. pressed key has level 0V ) to make it more 'logical' to work with
CLRF kbColumnVal
; get column counter / adress out
MOVF kbColumnCnt,W
MOVWF PORTB ; set the columns adress to the 74HCT4051
; i.e. make column low
IFNDEF DEBUG
CALL DELAY_1ms ; wait 1 ms let pins stabilize
ENDIF
COMF PORTB,W ; read back the pin values ( complement i.e. key pressed = '1' )
ANDLW b'11110000' ; mask out unused pins
MOVWF kbColumnVal ; store the pin values
SWAPF kbColumnVal,F ; swap nibbles ( low<->high ) to make room for next column
INCF kbColumnCnt,F ; inc column adress
MAIN_CHECK_COL_2:
; read next four bits
; put out adress and read next column, read as complement so key pressed = '1'
; this as we pull down when key is pressed ( weak pullup enabled )
; get column counter / adress out
MOVF kbColumnCnt,W
MOVWF PORTB ; set the columns adress to the 74HCT4051
; i.e. make column low
IFNDEF DEBUG
CALL DELAY_1ms ; wait 1 ms
ENDIF
COMF PORTB,W ; read back the pin values ( complement i.e. key pressed = '1' )
ANDLW b'11110000' ; mask out unused pins
ADDWF kbColumnVal,F ; and store pin values
INCF kbColumnCnt,F
; reset column counter check
; i.e. we are 'only' using adress 0 - 7
MOVF kbColumnCnt,W
SUBLW H'08' ; subtract value in W with 0x08
BTFSS STATUS, Z ; check if the zero bit is set
GOTO MAIN_CHECK_DEBOUNCE ; nope continue
CLRF kbColumnCnt ; reset counter/adress
MAIN_CHECK_DEBOUNCE:
CALL KB_DEBOUNCE ; do debouncing on the current values and send make/break
; for any key that has changed
; NOTE uses the current column adress to determine which
; columns to debounce!
MAIN_REPEAT:
BTFSS I_jmp_NoRepeat ; check if repeat code is enabled ?
GOTO MAIN_CHECK_REPEAT ; yep check key repeating
; keyrepeat disabled then do check on exit of altkeymap instead
BTFSS _ExitAltKeymap ; we want to exit altkeymap ?
GOTO MAIN_LOOP ; nope
; check that ALL keys are released
; before exiting the alt keymap
MOVF kbColumn78_Old,F ; reload column 78 to itself ( affect zero flag )
BTFSS STATUS,Z ; check if zero ?
GOTO MAIN_LOOP ; key/s still down in column 78
MOVF kbColumn56_Old,F ; reload column 56 to itself ( affect zero flag )
BTFSS STATUS,Z ; check if zero ?
GOTO MAIN_LOOP ; key/s still down in column 56
MOVF kbColumn34_Old,F ; reload column 34 to itself ( affect zero flag )
BTFSS STATUS,Z ; check if zero ?
GOTO MAIN_LOOP ; key/s still down in column 34
MOVF kbColumn12_Old,F ; reload column 12 to itself ( affect zero flag )
BTFSS STATUS,Z ; check if zero ?
GOTO MAIN_LOOP ; key/s still down in column 12
; all keys released !!
BCF _AltKeymap ; exit altkeymap
BCF _ExitAltKeymap ; exit release check
BCF _InAltKeymap ; clear flag for second keypress check
BCF _DoExitAltKeymap ;
GOTO MAIN_LOOP
MAIN_CHECK_REPEAT
BTFSS _doSendKey ; if we should send a repeated key
GOTO MAIN_LOOP ; nope continue
; send the key in RepeatedKey but first check if its an extended key
BTFSS _RepeatIsExt ; is it extended ?
GOTO MAIN_SEND_REPEAT ; nope just send scan code
; last key pressed was extended send extended prefix
MOVLW EXTENDED ; get extended code
CALL ADD_KEY_BUFFER ; and put it into the buffer
MAIN_SEND_REPEAT:
MOVF RepeatKey,W ; get key code for the last pressed key
CALL ADD_KEY_BUFFER ; and put it into the buffer
BCF _doSendKey ; and clear the flag, it will be set again
; inside int handler if key still is pressed
GOTO MAIN_LOOP ; and return
; ***********************************************************************
;
; KB_SEND_KEY - uses the Offset stored in var 'Offset' to fetch a key from our
; key lookup table.
; then checks the bit var _isBreak to see if make or break codes should be sent
; It then puts the code/s into the key buffer ( for sending later, in int routine )
KB_SEND_KEY:
MOVF Offset,W ; get current offset
MOVWF TempOffset ; save it ( to be used in key repeat code, is its 'make' )
; temp offset has the following bits:
; '000yyxxx' where 'yy' is column offset
; and 'xxx' is key num,
CLRC ; clear carry so it dont affect byte rotation
RLF Offset,F ; first rotate
RLF Offset,F ; second rotate
; offset no have the following bits:
; '0yyxxx01' where 'yy' is column offset
; and 'xxx' is key num,
; as each key in table has 4 bytes of 'space'
INCF Offset,F ; add one, for the 'movwf pcl' at the start of the table
BCF Offset,7 ; clear to bit, just in case so we dont
; 'overflow' the table, should not be needed !
BCF _isExtended ; clear extended flag
MOVLW LOW LOOKUP_KEY ; get low bit of table adress
ADDWF Offset,F ; 8 bit add
MOVLW HIGH LOOKUP_KEY ; get high 5 bits
BTFSC STATUS,C ; is page boundary crossed ?
ADDLW 1 ; yep, then inc high adress
MOVWF PCLATH ; load high adress in latch
MOVF Offset,W ; load computed offset in w
CLRC ; clear carry ( default= key is not extended )
; if key is extended then carry is set in jumptable lookup_key
CALL LOOKUP_KEY ; get key scan code/s for this key
; key scan code/s are saved in
; W - scancode, should go into kbScan
; carry set - extend code
; carry clear - not extended code
MOVWF kbScan ; store scancode
; if carry is set then key is extended so first send extended code
; before any make or break code
BTFSS STATUS,C ; check carry flag
GOTO KB_CHK_BREAK ; nope then check make/break status
BSF _isExtended ; set extended flag
MOVLW EXTENDED ;
CALL ADD_KEY_BUFFER ; get extended code and put in in the buffer
KB_CHK_BREAK:
; check if it's make or break
BTFSS _isBreak ; check if its pressed or released ?
GOTO KB_DO_MAKE_ONLY ; send make code
BCF _isBreak ; clear bit for next key
; break code, key is released
MOVLW BREAK ; get break code
CALL ADD_KEY_BUFFER ; and put into buffer
GOTO KB_DO_MAKE ; and send key code also
; key is pressed !
KB_DO_MAKE_ONLY:
BCF _doSendKey ; stop repeat sending
BCF _doRepeat ; and bit for repeat key send
BSF _startRepeat ; and set flag for start key repeat check
BCF _RepeatIsExt ; clear repeat key extended flag ( just in case )
BTFSC _isExtended ; is it extended ?
BSF _RepeatIsExt ; set the flag
; save this key in 'last' pressed, to be used in key repeat code
MOVF TempOffset,W ; get saved offset
MOVWF LastMakeOffset ; and store it
; if keyrepat = enabled, alternative mapping = disabled
BTFSS I_jmp_NoRepeat ; check if repeat code is enabled ?
GOTO KB_REP_NOR ; yep set normal delay ( 800 ms )
; else keyrepat = disabled, alternative mapping = enabled
MOVLW DELAY_ENTER_ALTKEYMAP ;reload delay before entering the altkeymap ( 3 sec )
; i.e how long the enter altkeymap key must be pressed before
; we enable altkey keymap codes.
GOTO KB_REP_SET ; and set it
KB_REP_NOR:
MOVLW DELAY_REPEAT ; reload 'normal' repeat delay ( 800 ms )
KB_REP_SET:
MOVWF RepeatTimer ; and (re)start the timer for key repeat
MOVF kbScan,W ; get key scan code
MOVWF RepeatKey ; and save it
KB_DO_MAKE:
; key pressed/released ( i.e. the scancode is sent both on make and break )
MOVF kbScan,W ; get scan code into w
CALL ADD_KEY_BUFFER ; and add to send buffer
; reset the 'get out of alt. keymap timer for each keypress
; note don't care if we are 'in' alt. keymap. Reset this timer anyway
; as the code for checking if we are currently in alt. key map
; would be as long as it takes to reset the timer.
MOVLW DELAY_EXIT_ALTKEYMAP ; reload the delay for exiting the altkeymap when no
; key is pressed ( 7.5 sec )
MOVWF LastKeyTime ; (re)set lastkey timer ( used to get out of altkeymap )
RETURN
; ***********************************************************************
;
; KB_DEBOUNCE - debounces two column readings from our keyboard
; If a bit 'state' has been 'stable' for 4 consecutive debounces
; the 'new' byte is updated with the new state
; 'normal' loop time ( no tx/rx/key press ) is about 2-3 ms
; so from 'key' down until 'new' is updated it takes about 8-10 ms
; ( as we are scanning columns two by two, the whole keyboard needs
; 4 loops to be fully updated, then 4 debounce samples for each 'pair' )
KB_DEBOUNCE:
; debounce current column(s)
MOVF kbColumnCnt,F ; reload value into itself ( affect zero flag )
BTFSC STATUS,Z ; is it zero ?
GOTO KB_DEBOUNCE_78 ; debounce columns 7 & 8
MOVF kbColumnCnt,W ; move column counter into W register
SUBLW H'04' ; subtract value in W with 0x04 ( columns 5 & 6 )
BTFSC STATUS, Z ; check if the zero bit is set
GOTO KB_DEBOUNCE_34 ; debounce columns 3 & 4
MOVF kbColumnCnt,W ; move column counter into W register
SUBLW H'06' ; subtract value in W with 0x02 ( columns 3 & 4 )
BTFSC STATUS, Z ; check if the zero bit is set
GOTO KB_DEBOUNCE_56 ; ok column 1 & 2 debounce
; all above tests 'failed'
; columns to debouce are 1 & 2
KB_DEBOUNCE_12:
; debounce columns 1 & 2
DEBOUNCE_BYTE kbColumnVal,kbColumn12_New,kbColumn12Cnt,kbColumn12State
MOVF kbColumn12_New,W ; get debounced sample
XORWF kbColumn12_Old,W ; get changed bits
BTFSC STATUS,Z ; check if zero = no change
RETURN ; no change. return
; key/s has been changed, w contains which key/s that has been changed in column 7 & 8
; Note ! Not the actual state of the key, only 'change has occured' = '1'
MOVWF kbState ; save change bit/s
MOVLW H'07' ; preset bit counter
MOVWF kbBitCnt ; loop though all eight bits.
BCF _LastColumn ; clear end seq bit ( set when are done with last bit )
MOVF kbColumn12_New,W ; get new sample
MOVWF kbTemp ; and store it
KB_LOOP_12
CLRF Offset ; clear offset counter ( for table read )
CLRC ; clear carry
RLF kbState,F ; rotate left, and store back
BTFSS STATUS,C ; check carry '1' = bit was high = change has occured
GOTO KB_LOOP_12_SKIP ; nope, no change check next bit ( or exit )
; bit changed
MOVF kbBitCnt,W ; get bit counter ( for offset calc. )
MOVWF Offset ; store bit num ( for offset )
CLRC ; clear carry
RLF kbTemp,F ; rotate left ( next bit )
BTFSS STATUS,C ; check carry '1' = key is down ( i.e. make )
BSF _isBreak ; c = '0' = send break code, i.e. key is released
CALL KB_SEND_KEY ; send key code/s make/break uses
; Offset, and _isBreak vars
GOTO KB_LOOP_12_NEXT
KB_LOOP_12_SKIP
RLF kbTemp,F ; rotate so we read next key
KB_LOOP_12_NEXT
BTFSC _LastColumn ; are we done ?
GOTO KB_12_DONE ; yep, save new key bit map and exit
DECFSZ kbBitCnt,F ; decrement bit counter
GOTO KB_LOOP_12 ; bits left
BSF _LastColumn ; set bit so we break out after next run
GOTO KB_LOOP_12
KB_12_DONE:
; and update our 'last known' status for the columns
MOVF kbColumn12_New,W ; get new status
MOVWF kbColumn12_Old ; and store it..
;<-------Alt keymap code------->
; ***** alternative keymap handling
; The alternative keymap is enabled by pressing key r4 c1 ( i.e. bit 3 in column 12 )
; Here, we enable a check to turn off alternative keymap if
; that key and all others are released ( bit is cleared ).
; ( else no (alternative)break codes would be sent for those keys that are still pressed )
; NOTE: _Altkeymap is set inside int routine when checking
; keyrepeat so there is a 'variable' delay before the altkeymap is active
;
BTFSS _AltKeymap ; is altkeymap enabled ?
RETURN ; nope return
BTFSC _InAltKeymap ; are we in altkeymap ?
GOTO KB_12_IN ; yep alt keymap key has been released once
; nope still waiting for first release
BTFSS kbColumn12_Old,2 ; is key released ? ( first time )
GOTO KB_12_ALT ; yep, reset timers and set bit variables
KB_12_IN
BTFSC _DoExitAltKeymap ; are we waiting for release ?
GOTO KB_12_OUT ; yes
; the key has been released once test for second press
BTFSC kbColumn12_Old,2 ; is it still pressed ?
GOTO KB_12_ALT2 ; yep
BTFSS _DoExitAltKeymap ; are we now waiting for the last ( second ) release ?
RETURN ; nope
KB_12_OUT
BTFSS kbColumn12_Old,2 ; check if key still pressed ?
BSF _ExitAltKeymap ; nope, then enable exit check that
; will exit alt keymap as soon as all key are released
KB_12_ALT2
BSF _DoExitAltKeymap ; check for second release
RETURN
KB_12_ALT
; first release of the enter alt keymap key
; reset 'get out' timer and set bit variables to enable check
; for second press/release
MOVLW H'0F' ; x0.5 sec = 7.5 sec
MOVWF LastKeyTime ; (re)set lastkey timer ( used to get out of altkeymap automaticly)
BSF _InAltKeymap ; yep the first time, then set flag that we are now
; waiting for a second press/release to exit alt key map
; all keys are released before exiting altkeymap
;***** Example snippet(one line) to be paired with code in CHECK_KEY_STATE where I
; forced numlock status to be off while enetering the alt keymap
; but have not yet released the alt keymap toggle key.
; this code will be called at the first release of this key. Used
; to restore numlock status.
; As said before, do not use if implifications are not known !
;BSF _NumLock ; and also force numlock to be 'on'
; as it is set to 'off' when we enter altkeymap
; we must set it 'back'
RETURN
KB_DEBOUNCE_34:
; debounce columns 3 & 4
DEBOUNCE_BYTE kbColumnVal,kbColumn34_New,kbColumn34Cnt,kbColumn34State
MOVF kbColumn34_New,W ; get debounced sample
XORWF kbColumn34_Old,W ; get changed bits
BTFSC STATUS,Z ; check if zero = no change
RETURN ; no change. return
; key/s has been changed, w contains which key/s that has been changed in column 7 & 8
; Note ! Not the actual state of the key, only 'change has occured' = '1'
MOVWF kbState ; save change bit/s
MOVLW H'07' ; preset bit counter
MOVWF kbBitCnt ; loop though all eight bits.
BCF _LastColumn ; clear end seq bit ( set when are done with last bit )
MOVF kbColumn34_New,W ; get new sample
MOVWF kbTemp ; and store it
KB_LOOP_34
CLRF Offset ; clear offset counter ( for table read )
CLRC ; clear carry
RLF kbState,F ; rotate left, and store back
BTFSS STATUS,C ; check carry '1' = bit was high = change has occured
GOTO KB_LOOP_34_SKIP ; nope, no change check next bit ( or exit )
; bit changed
MOVF kbBitCnt,W ; get bit counter ( for offset calc. )
MOVWF Offset ; store bit num ( for offset )
BSF Offset,3 ; set bit 3 for table read ( column 3 & 4 )
;BCF _isBreak ; clear break flag
CLRC ; clear carry
RLF kbTemp,F ; rotate left ( next bit )
BTFSS STATUS,C ; check carry '1' = key is down ( i.e. make )
BSF _isBreak ; c = '0' = send break code, i.e. key is released
CALL KB_SEND_KEY ; send key code/s make/break uses
; Offset, and _isBreak vars
GOTO KB_LOOP_34_NEXT
KB_LOOP_34_SKIP
RLF kbTemp,F ; rotate so we read next key
KB_LOOP_34_NEXT
BTFSC _LastColumn ; are we done ?
GOTO KB_34_DONE ; yep, save new key bit map and exit
DECFSZ kbBitCnt,F ; decrement bit counter
GOTO KB_LOOP_34 ; bits left
BSF _LastColumn ; set bit so we break out after next run
GOTO KB_LOOP_34
KB_34_DONE:
; and update our 'last known' status for the columns
MOVF kbColumn34_New,W ; get new status
MOVWF kbColumn34_Old ; and store it..
RETURN
KB_DEBOUNCE_56:
; debounce columns 5 & 6
DEBOUNCE_BYTE kbColumnVal,kbColumn56_New,kbColumn56Cnt,kbColumn56State
MOVF kbColumn56_New,W ; get debounced sample
XORWF kbColumn56_Old,W ; get changed bits
BTFSC STATUS,Z ; check if zero = no change
RETURN ; no change. return
; key/s has been changed, w contains which key/s that has been changed in column 7 & 8
; Note ! Not the actual state of the key, only that 'a change has occured' = '1'
MOVWF kbState ; save change bit/s
MOVLW H'07' ; preset bit counter
MOVWF kbBitCnt ; loop though all eight bits.
BCF _LastColumn ; clear end seq bit ( set when are done with last bit )
MOVF kbColumn56_New,W ; get new sample
MOVWF kbTemp ; and store it
KB_LOOP_56
CLRF Offset ; clear offset counter ( for table read )
CLRC ; clear carry
RLF kbState,F ; rotate left, and store back
BTFSS STATUS,C ; check carry '1' = bit was high = change has occured
GOTO KB_LOOP_56_SKIP ; nope, no change check next bit ( or exit )
; bit changed
MOVF kbBitCnt,W ; get bit counter ( for offset calc. )
MOVWF Offset ; store bit num ( for offset )
BSF Offset,4 ; set bit 4 for table read ( column 5 & 6 )
CLRC ; clear carry
RLF kbTemp,F ; rotate left ( next bit )
BTFSS STATUS,C ; check carry '1' = key is down ( i.e. make )
BSF _isBreak ; c = '0' = send break code, i.e. key is released
CALL KB_SEND_KEY ; send key code/s make/break uses
; Offset, and _isBreak vars
GOTO KB_LOOP_56_NEXT
KB_LOOP_56_SKIP
RLF kbTemp,F ; rotate so we read next key
KB_LOOP_56_NEXT
BTFSC _LastColumn ; are we done ?
GOTO KB_56_DONE ; yep, save new key bit map and exit
DECFSZ kbBitCnt,F ; decrement bit counter
GOTO KB_LOOP_56 ; bits left
BSF _LastColumn ; set bit so we break out after next run
GOTO KB_LOOP_56
KB_56_DONE:
; and update our 'last known' status for the columns
MOVF kbColumn56_New,W ; get new status
MOVWF kbColumn56_Old ; and store it..
RETURN
KB_DEBOUNCE_78:
; debounce columns 7 & 8
DEBOUNCE_BYTE kbColumnVal,kbColumn78_New,kbColumn78Cnt,kbColumn78State
MOVF kbColumn78_New,W ; get debounced sample
XORWF kbColumn78_Old,W ; get changed bits
BTFSC STATUS,Z ; check if zero = no change
RETURN ; no change. return
; key/s has been changed, w contains which key/s that has been changed in column 7 & 8
; Note ! Not the actual state of the key, only 'change has occured' = '1'
MOVWF kbState ; save change bit/s
MOVLW H'07' ; preset bit counter
MOVWF kbBitCnt ; loop though all eight bits. ( 7-0 )
BCF _LastColumn ; clear end seq bit ( set when are done with last bit )
MOVF kbColumn78_New,W ; get new sample
MOVWF kbTemp ; and store it
KB_LOOP_78
CLRF Offset ; clear offset counter ( for table read )
CLRC ; clear carry
RLF kbState,F ; rotate left, and store back
BTFSS STATUS,C ; check carry '1' = bit was high = change has occured
GOTO KB_LOOP_78_SKIP ; nope, no change check next bit ( or exit )
; bit changed
MOVF kbBitCnt,W ; get bit counter ( for offset calc. )
MOVWF Offset ; store bit num ( for offset )
BSF Offset,4 ; set bit 3,4 for table read ( column 7 & 8 )
BSF Offset,3 ;
CLRC ; clear carry
RLF kbTemp,F ; rotate left ( next bit )
BTFSS STATUS,C ; check carry '1' = key is down ( i.e. make )
BSF _isBreak ; c = '0' = send break code, i.e. key is released
CALL KB_SEND_KEY ; send key code/s make/break uses
; Offset, and _isBreak vars
GOTO KB_LOOP_78_NEXT
KB_LOOP_78_SKIP
RLF kbTemp,F ; rotate so we read next key
KB_LOOP_78_NEXT
BTFSC _LastColumn ; are we done ?
GOTO KB_78_DONE ; yep, save new key bit map and exit
DECFSZ kbBitCnt,F ; decrement bit counter
GOTO KB_LOOP_78 ; bits left
BSF _LastColumn ; set bit so we break out after next run
GOTO KB_LOOP_78
KB_78_DONE:
; and update our 'last known' status for the columns
MOVF kbColumn78_New,W ; get new status
MOVWF kbColumn78_Old ; and store it..
RETURN
; ***********************************************************************
;
; LOOKUP_KEY - lookup table for key scancodes.
; Returns a scancode in w
; Sets carry if key is extended
; NOTE: If key R3 C1 has been pressed longer than keyrepeat delay
; AND keyrepeat is disabled ( jumper on pin RB3 ) THEN the
; bit _AltKeymap is set and we can return an alternative scancode in W
;
LOOKUP_KEY ; lookup table for the keys ( 32 keys x 4 lines + 1 = 129 lines )
; keys are labelled Rx - Cy where x = row number and y = column number
; handles a 4 row x 8 column keyboard = 32 keys
MOVWF PCL ; add to program counter
; R1 - C1 i.e. key 1
NOP
NOP
NOP
RETLW H'05' ; scan code 'F1'
; R2 - C1 i.e. key 2
NOP
NOP
NOP
RETLW H'0C' ; scan code 'F4'
; R3 - C1 i.e. key 3
; The famous alternative keymap toggle key !!! ;-)
; It is adviced that this key does not use an alt scancode
; makes things cleaner and simplified.
; IF USED though, remember that a 'soft' release code must be sent
; for this key when entering the altkeymap !( + 'soft' make code for the alternative key )
; This as the key is pressed when entering altkeymap
; which makes the bit _Altkeymap be set, and hence when released
; the release code for this 'normal' key will never be sent
; instead the release code for the alternative key will be sent.
; To 'fix' this put the release code at the end of CHECK_KEY_STATE ( where the
; alt keymap bit is set ).i.e. break prefix+scancode for normal key.
NOP
NOP
NOP
RETLW H'83' ; scan code for F7 ( in 'normal' mode )
; R4 - C1 i.e. key 4
BTFSC _AltKeymap ; check for alternative keymap
RETLW H'76' ; send scancode for 'ESC' instead
BSF STATUS,C ; set carry ( i.e. extended code )
RETLW H'6B' ; scan code 'arrow left' '<-'
; R1 - C2 i.e. key 5
NOP
NOP
NOP
RETLW H'06' ; scan code 'F2' hex06
; R2 - C2 i.e. key 6
NOP
NOP
NOP
RETLW H'03' ; scan code 'F5'
; R3 - C2 i.e. key 7
BTFSC _AltKeymap ; check for alternative keymap
RETLW H'0D' ; send scancode for 'horizontaltab' HT instead
BSF STATUS,C ; set carry ( i.e. extended code )
RETLW H'75' ; scan code 'arrow up' '^'
; R4 - C2 i.e. key 8
BTFSC _AltKeymap ; check for alternative keymap
RETLW H'14' ; send scancode for 'left ctrl' instead
BSF STATUS,C ; set carry ( i.e. extended code )
RETLW H'72' ; scan code 'arrow down'
; R1 - C3 i.e. key 9
NOP
NOP
NOP
RETLW H'04' ; scan code 'F3'
; R2 - C3 i.e. key 10
NOP
NOP
NOP
RETLW H'0B' ; scan code 'F6'
; R3 - C3 i.e. key 11
NOP
NOP
NOP
RETLW H'0A' ; scan code 'F8'
; R4 - C3 i.e. key 12
BTFSC _AltKeymap ; check for alternative keymap
RETLW H'11' ; send scancode for 'left alt' instead
BSF STATUS,C ; set carry ( i.e. extended code )
RETLW H'74' ; scan code 'arrow right' '->'
; R1 - C4 i.e. key 13
BTFSC _AltKeymap ; check for alternative keymap
RETLW H'6C' ; send scancode for numeric '7' instead
NOP
RETLW H'3D' ; scan code '7'
; R2 - C4 i.e. key 14
BTFSC _AltKeymap ; check for alternative keymap
RETLW H'6B' ; send scancode for numeric '4' instead
NOP
RETLW H'25' ; scan code '4'
; R3 - C4 i.e. key 15
BTFSC _AltKeymap ; check for alternative keymap
RETLW H'69' ; send scancode for numeric '1' instead
NOP
RETLW H'16' ; scan code '1'
; R4 - C4 i.e. key 16
BTFSC _AltKeymap ; check for alternative keymap
RETLW H'7B' ; send scancode for numeric '-' instead
NOP
RETLW H'4A' ; scan code '-' minus ( swe kbd )
; R1 - C5 i.e. key 17
BTFSC _AltKeymap ; check for alternative keymap
RETLW H'75' ; send scancode for numeric '8' instead
NOP
RETLW H'3E' ; scan code '8'
; R2 - C5 i.e. key 18
BTFSC _AltKeymap ; check for alternative keymap
RETLW H'73' ; send scancode for numeric '5' instead
NOP
RETLW H'2E' ; scan code '5'
; R3 - C5 i.e. key 19
BTFSC _AltKeymap ; check for alternative keymap
RETLW H'72' ; send scancode for numeric '2' instead
NOP
RETLW H'1E' ; scan code '2'
; R4 - C5 i.e. key 20
BTFSS _AltKeymap ; check for alternative keymap
RETLW H'45' ; scan code '0' ( from keypad ) normal key
BSF STATUS,C ; set carry ( i.e. extended code )
RETLW H'1F' ; alt keycode ( windows start menu activate )
; R1 - C6 i.e. key 21
BTFSC _AltKeymap ; check for alternative keymap
RETLW H'7D' ; send scancode for numeric '9' instead
NOP
RETLW H'46' ; scan code '9'
; R2 - C6 i.e. key 22
BTFSC _AltKeymap ; check for alternative keymap
RETLW H'74' ; send scancode for numeric '6' instead
NOP
RETLW H'36' ; scan code '6'
; R3 - C6 i.e. key 23
BTFSC _AltKeymap ; check for alternative keymap
RETLW H'7A' ; send scancode for numeric '3' instead
NOP
RETLW H'26' ; scan code '3'
; R4 - C6 i.e. key 24
BTFSS _AltKeymap ; check for alternative keymap
RETLW H'49' ; scan code '.' ( swe kbd ) normal key
; use alternative keymap
BSF STATUS,C ; set carry ( i.e. extended code )
RETLW H'4A' ; send scancode for numeric '/' instead
; R1 - C7 i.e. key 25
BTFSC _AltKeymap ; check for alternative keymap
RETLW H'79' ; send scancode for numeric '+' instead
NOP
RETLW H'4E' ; scan code '+'
; R2 - C7 i.e. key 26
BTFSS _AltKeymap ; check for alternative keymap
RETLW H'66' ; scan code 'back space' BS, normal key
; use alternative keymap
BSF STATUS,C ; set carry ( i.e. extended code )
RETLW H'71' ; send scancode for 'delete' instead
; R3 - C7 i.e. key 27
BTFSS _AltKeymap ; check for alternative keymap
RETLW H'5A' ; scan code 'enter', normal key
; use alternative keymap
BSF STATUS,C ; set carry ( i.e. extended code )
RETLW H'5A' ; send scancode for numeric enter instead ( note ! extended )
; R4 - C7 i.e. key 28
BTFSS _AltKeymap ; check for alternative keymap
RETLW H'5A' ; scan code 'enter', normal key
; use alternative keymap
BSF STATUS,C ; set carry ( i.e. extended code )
RETLW H'5A' ; send scancode for numeric enter instead ( note ! extended )
; R1 - C8 i.e. key 29
NOP
NOP
NOP
RETLW H'2C' ; scan code 't'
; R2 - C8 i.e. key 30
NOP
NOP
NOP
RETLW H'24' ; scan code 'e'
; R3 - C8 i.e. key 31
NOP
NOP
NOP
RETLW H'1B' ; scan code 's'
; R4 - C8 i.e. key 32
NOP
NOP
NOP
RETLW H'2C' ; scan code 't'
END
Comments:
| file: /Techref/microchip/picboardasm.htm, 93KB, , updated: 2010/4/22 09:40, local time: 2024/11/29 23:06,
18.217.4.250:LOG IN
|
| ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://sxlist.com/Techref/microchip/picboardasm.htm"> *** Your Title Here ***</A> |
| Did you find what you needed? |
Welcome to sxlist.com!sales, advertizing, & kind contributors just like you! Please don't rip/copy (here's why Copies of the site on CD are available at minimal cost. |
Welcome to sxlist.com! |
.