This file is part of SimpleRTOS2
/*============================================================================*/
/*============================================================================*/
/*============================================================================*/
/* BASIC INTERRUPT DRIVEN SERIAL PORT DRIVER.
NOTE: This driver is primarily to test the scheduler functionality. It does
not effectively use the buffers or DMA and is therefore not intended to be
an example of an efficient driver. */
/*============================================================================*/
/*============================================================================*/
/*============================================================================*/
/*============================================================================*/
/*
Note: This file was severely modified from the original FreeRTOS version.
*/
/*============================================================================*/
/*============================================================================*/
/*============================================================================*/
/*============================================================================*/
#if defined __XC32__ || defined __C32_VERSION__
/*============================================================================*/
#include <stdlib.h>
/*============================================================================*/
/* Scheduler include files. */
#include "Portable.h"
#include "Queue.h"
#include "PortPIC32Internals.h"
#include "SimpleRTOSInternals.h"
/*============================================================================*/
/* Demo app include files. */
#include "SerialPIC32.h"
/*============================================================================*/
#if defined __PIC32MX__
/*----------------------------------------------------------------------------*/
/*----------------------------------------------------------------------------*/
#if defined __32MX110F016B__ || defined __32MX110F016C__ || defined __32MX110F016D__ || \
defined __32MX120F032B__ || defined __32MX120F032C__ || defined __32MX120F032D__ || \
defined __32MX130F064B__ || defined __32MX130F064C__ || defined __32MX130F064D__ || \
defined __32MX150F128B__ || defined __32MX150F128C__ || defined __32MX150F128D__ || \
defined __32MX170F256B__ || defined __32MX170F256D__ || \
defined __32MX210F016B__ || defined __32MX210F016C__ || defined __32MX210F016D__ || \
defined __32MX220F032B__ || defined __32MX220F032C__ || defined __32MX220F032D__ || \
defined __32MX230F064B__ || defined __32MX230F064C__ || defined __32MX230F064D__ || \
defined __32MX250F128B__ || defined __32MX250F128C__ || defined __32MX250F128D__ || \
defined __32MX270F256B__ || defined __32MX270F256D__
/*----------------------------------------------------------------------------*/
#define SERIAL_PORTS 2
#define IFSbitsU1RX IFS1bits
#define IFSbitsU1TX IFS1bits
#define IECbitsU1RX IEC1bits
#define IECbitsU1TX IEC1bits
#define IPCbitsU1 IPC8bits
#define IFSbitsU2RX IFS1bits
#define IFSbitsU2TX IFS1bits
#define IECbitsU2RX IEC1bits
#define IECbitsU2TX IEC1bits
#define IPCbitsU2 IPC9bits
/*----------------------------------------------------------------------------*/
/*----------------------------------------------------------------------------*/
#elif defined __32MX320F032H__ || defined __32MX320F064H__ || defined __32MX320F128H__ || \
defined __32MX340F128H__ || defined __32MX340F256H__ || defined __32MX340F512H__ || \
defined __32MX320F128L__ || \
defined __32MX340F128L__ || \
defined __32MX360F256L__ || defined __32MX360F512L__ || \
defined __32MX420F032H__ || \
defined __32MX440F128H__ || defined __32MX440F256H__ || defined __32MX440F512H__ || \
defined __32MX440F128L__ || \
defined __32MX460F256L__ || defined __32MX460F512L__
/*----------------------------------------------------------------------------*/
#define SERIAL_PORTS 2
#define IFSbitsU1RX IFS0bits
#define IFSbitsU1TX IFS0bits
#define IECbitsU1RX IEC0bits
#define IECbitsU1TX IEC0bits
#define IPCbitsU1 IPC6bits
#define IFSbitsU2RX IFS1bits
#define IFSbitsU2TX IFS1bits
#define IECbitsU2RX IEC1bits
#define IECbitsU2TX IEC1bits
#define IPCbitsU2 IPC8bits
/*----------------------------------------------------------------------------*/
/*----------------------------------------------------------------------------*/
#elif defined __32MX120F064H__ || defined __32MX130F128H__ || \
defined __32MX150F256H__ || defined __32MX170F512H__ || \
defined __32MX230F128H__ || defined __32MX250F256H__ || \
defined __32MX270F512H__ || \
defined __32MX330F064H__ || defined __32MX350F128H__ || \
defined __32MX350F256H__ || defined __32MX370F512H__ || \
defined __32MX430F064H__ || defined __32MX450F128H__ || \
defined __32MX450F256H__ || defined __32MX470F512H__ || \
\
defined __32MX530F128H__ || defined __32MX550F256H__ || defined __32MX570F512H__
/*----------------------------------------------------------------------------*/
#define SERIAL_PORTS 4
#define IFSbitsU1RX IFS1bits
#define IFSbitsU1TX IFS1bits
#define IECbitsU1RX IEC1bits
#define IECbitsU1TX IEC1bits
#define IPCbitsU1 IPC7bits
#define IFSbitsU2RX IFS1bits
#define IFSbitsU2TX IFS1bits
#define IECbitsU2RX IEC1bits
#define IECbitsU2TX IEC1bits
#define IPCbitsU2 IPC9bits
#define IFSbitsU3RX IFS1bits
#define IFSbitsU3TX IFS2bits
#define IECbitsU3RX IEC1bits
#define IECbitsU3TX IEC2bits
#define IPCbitsU3 IPC9bits
#define IFSbitsU4RX IFS2bits
#define IFSbitsU4TX IFS2bits
#define IECbitsU4RX IEC2bits
#define IECbitsU4TX IEC2bits
#define IPCbitsU4 IPC9bits
/*----------------------------------------------------------------------------*/
/*----------------------------------------------------------------------------*/
#elif defined __32MX130F128L__ || defined __32MX150F256L__ || \
defined __32MX170F512L__ || defined __32MX230F128L__ || \
defined __32MX250F256L__ || defined __32MX270F512L__ || \
\
defined __32MX330F064L__ || defined __32MX350F128L__ || \
defined __32MX350F256L__ || defined __32MX370F512L__ || \
defined __32MX430F064L__ || defined __32MX450F128L__ || \
defined __32MX450F256L__ || defined __32MX470F512L__ || \
\
defined __32MX530F128L__ || defined __32MX550F256L__ || defined __32MX570F512L__
/*----------------------------------------------------------------------------*/
#define SERIAL_PORTS 5
#define IFSbitsU1RX IFS1bits
#define IFSbitsU1TX IFS1bits
#define IECbitsU1RX IEC1bits
#define IECbitsU1TX IEC1bits
#define IPCbitsU1 IPC7bits
#define IFSbitsU2RX IFS1bits
#define IFSbitsU2TX IFS1bits
#define IECbitsU2RX IEC1bits
#define IECbitsU2TX IEC1bits
#define IPCbitsU2 IPC9bits
#define IFSbitsU3RX IFS1bits
#define IFSbitsU3TX IFS2bits
#define IECbitsU3RX IEC1bits
#define IECbitsU3TX IEC2bits
#define IPCbitsU3 IPC9bits
#define IFSbitsU4RX IFS2bits
#define IFSbitsU4TX IFS2bits
#define IECbitsU4RX IEC2bits
#define IECbitsU4TX IEC2bits
#define IPCbitsU4 IPC9bits
#define IFSbitsU5RX IFS2bits
#define IFSbitsU5TX IFS2bits
#define IECbitsU5RX IEC2bits
#define IECbitsU5TX IEC2bits
#define IPCbitsU5 IPC10bits
/*----------------------------------------------------------------------------*/
/*----------------------------------------------------------------------------*/
#elif defined __32MX534F064H__ || defined __32MX534F064L__ || \
defined __32MX564F064H__ || defined __32MX564F064L__ || \
defined __32MX564F128H__ || defined __32MX564F128L__ || \
defined __32MX575F256H__ || defined __32MX575F256L__ || \
defined __32MX575F512H__ || defined __32MX575F512L__ || \
defined __32MX664F064H__ || defined __32MX664F064L__ || \
defined __32MX664F128H__ || defined __32MX664F128L__ || \
defined __32MX675F256H__ || defined __32MX675F256L__ || \
defined __32MX675F512H__ || defined __32MX675F512L__ || \
defined __32MX695F512H__ || defined __32MX695F512L__ || \
defined __32MX764F128H__ || defined __32MX764F128L__ || \
defined __32MX775F256H__ || defined __32MX775F256L__ || \
defined __32MX775F512H__ || defined __32MX775F512L__ || \
defined __32MX795F512H__ || defined __32MX795F512L__
/*----------------------------------------------------------------------------*/
#define SERIAL_PORTS 6
#define IFSbitsU1RX IFS0bits
#define IFSbitsU1TX IFS0bits
#define IECbitsU1RX IEC0bits
#define IECbitsU1TX IEC0bits
#define IPCbitsU1 IPC6bits
#define IFSbitsU2RX IFS1bits
#define IFSbitsU2TX IFS1bits
#define IECbitsU2RX IEC1bits
#define IECbitsU2TX IEC1bits
#define IPCbitsU2 IPC8bits
#define IFSbitsU3RX IFS1bits
#define IFSbitsU3TX IFS1bits
#define IECbitsU3RX IEC1bits
#define IECbitsU3TX IEC1bits
#define IPCbitsU3 IPC7bits
#define IFSbitsU4RX IFS2bits
#define IFSbitsU4TX IFS2bits
#define IECbitsU4RX IEC2bits
#define IECbitsU4TX IEC2bits
#define IPCbitsU4 IPC12bits
#define IFSbitsU5RX IFS2bits
#define IFSbitsU5TX IFS2bits
#define IECbitsU5RX IEC2bits
#define IECbitsU5TX IEC2bits
#define IPCbitsU5 IPC12bits
#define IFSbitsU6RX IFS2bits
#define IFSbitsU6TX IFS2bits
#define IECbitsU6RX IEC2bits
#define IECbitsU6TX IEC2bits
#define IPCbitsU6 IPC12bits
/*----------------------------------------------------------------------------*/
#endif /* defined __32MX250F128B__ */
/*----------------------------------------------------------------------------*/
/*----------------------------------------------------------------------------*/
#elif defined __PIC32MZ__
#define SERIAL_PORTS 6
#define IFSbitsU1RX IFS3bits
#define IFSbitsU1TX IFS3bits
#define IFSbitsU2RX IFS4bits
#define IFSbitsU2TX IFS4bits
#define IFSbitsU3RX IFS4bits
#define IFSbitsU3TX IFS4bits
#define IFSbitsU4RX IFS5bits
#define IFSbitsU4TX IFS5bits
#define IFSbitsU5RX IFS5bits
#define IFSbitsU5TX IFS5bits
#define IFSbitsU6RX IFS5bits
#define IFSbitsU6TX IFS5bits
#define IECbitsU1RX IEC3bits
#define IECbitsU1TX IEC3bits
#define IECbitsU2RX IEC4bits
#define IECbitsU2TX IEC4bits
#define IECbitsU3RX IEC4bits
#define IECbitsU3TX IEC4bits
#define IECbitsU4RX IEC5bits
#define IECbitsU4TX IEC5bits
#define IECbitsU5RX IEC5bits
#define IECbitsU5TX IEC5bits
#define IECbitsU6RX IEC5bits
#define IECbitsU6TX IEC5bits
#define IPCbitsU1RX IPC28bits
#define IPCbitsU1TX IPC28bits
#define IPCbitsU2RX IPC36bits
#define IPCbitsU2TX IPC36bits
#define IPCbitsU3RX IPC39bits
#define IPCbitsU3TX IPC39bits
#define IPCbitsU4RX IPC42bits
#define IPCbitsU4TX IPC43bits
#define IPCbitsU5RX IPC45bits
#define IPCbitsU5TX IPC45bits
#define IPCbitsU6RX IPC47bits
#define IPCbitsU6TX IPC47bits
#endif /* defined __PIC32MX__ */
/*============================================================================*/
#define QUEUE_LENGTH 32
/*============================================================================*/
/* The queues used to communicate between tasks and ISR's. */
/*static*/ queue_t QueuesRX[SERIAL_PORTS];
/*static*/ unsigned char BuffersRX[SERIAL_PORTS][QUEUE_LENGTH];
/*static*/ queue_t QueuesTX[SERIAL_PORTS];
/*static*/ unsigned char BuffersTX[SERIAL_PORTS][QUEUE_LENGTH];
/* Flag used to indicate the tx status. */
#define configPERIPHERAL_CLOCK_HZ 80000000
/*============================================================================*/
#if defined __PIC32MX__
#define SERIALINIT(p) \
U##p##MODEbits.ON = 0; \
U##p##BRG = usBRG; \
/* U##p##MODEbits.UEN = 0; */ \
U##p##MODEbits.BRGH = 1; \
U##p##MODEbits.ON = 1; \
U##p##STAbits.UTXISEL = 0; \
U##p##STAbits.URXEN = 1; \
U##p##STAbits.UTXEN = 1; \
U##p##STAbits.URXISEL = 0; \
IFSbitsU##p##RX.U##p##RXIF = 0; \
IPCbitsU##p.U##p##IP = KERNEL_INTERRUPT_PRIORITY + 0; \
IPCbitsU##p.U##p##IS = 0; \
IECbitsU##p##RX.U##p##RXIE = 1;
#elif defined __PIC32MZ__
#define SERIALINIT(p) \
U##p##MODEbits.ON = 0; \
U##p##BRG = usBRG; \
/* U##p##MODEbits.UEN = 0; */ \
U##p##MODEbits.BRGH = 1; \
U##p##MODEbits.ON = 1; \
U##p##STAbits.UTXISEL = 0; \
U##p##STAbits.URXEN = 1; \
U##p##STAbits.UTXEN = 1; \
U##p##STAbits.URXISEL = 0; \
IFSbitsU##p##RX.U##p##RXIF = 0; \
IPCbitsU##p##RX.U##p##RXIP = KERNEL_INTERRUPT_PRIORITY + 0; \
IPCbitsU##p##TX.U##p##TXIP = KERNEL_INTERRUPT_PRIORITY + 0; \
IPCbitsU##p##RX.U##p##RXIS = 0; \
IPCbitsU##p##TX.U##p##TXIS = 0; \
IECbitsU##p##RX.U##p##RXIE = 1;
#endif /* defined __PIC32MX__ */
/*============================================================================*/
extern __attribute__((weak)) void UserConfigUART1( void );
extern __attribute__((weak)) void UserConfigUART2( void );
extern __attribute__((weak)) void UserConfigUART3( void );
extern __attribute__((weak)) void UserConfigUART4( void );
extern __attribute__((weak)) void UserConfigUART5( void );
extern __attribute__((weak)) void UserConfigUART6( void );
/*============================================================================*/
int SerialPortInitMinimal( unsigned int port, unsigned long ulWantedBaud )
{
unsigned short usBRG;
if( port < 1 || port > SERIAL_PORTS )
return 0;
/* Create the queues used by the com test task. */
QueueInit( &QueuesRX[port-1], sizeof( signed char ), QUEUE_LENGTH, &BuffersRX[port-1], QUEUE_SWITCH_IN_ISR );
QueueInit( &QueuesTX[port-1], sizeof( signed char ), QUEUE_LENGTH, &BuffersTX[port-1], QUEUE_SWITCH_NORMAL );
/* Configure the UART and interrupts. */
usBRG = (unsigned short)(( (float)configPERIPHERAL_CLOCK_HZ / ( (float)4 * (float)ulWantedBaud ) ) - (float)0.5);
switch( port )
{
case 1:
SERIALINIT( 1 );
if( UserConfigUART1 != NULL )
UserConfigUART1();
break;
#if SERIAL_PORTS >= 2
case 2:
#if 0
SERIALINIT( 2 );
if( UserConfigUART2 != NULL )
UserConfigUART2();
#else /* 0 */
U2MODEbits.ON = 0;
U2BRG = usBRG;
/* U2MODEbits.UEN = 0; */
U2MODEbits.BRGH = 1;
U2MODEbits.ON = 1;
U2STAbits.UTXISEL = 0;
U2STAbits.URXEN = 1;
U2STAbits.UTXEN = 1;
U2STAbits.URXISEL = 0;
IFSbitsU2RX.U2RXIF = 0;
#if defined __PIC32MZ__
IPCbitsU2RX.U2RXIP = KERNEL_INTERRUPT_PRIORITY + 0;
IPCbitsU2RX.U2RXIS = 0;
IPCbitsU2TX.U2TXIP = KERNEL_INTERRUPT_PRIORITY + 0;
IPCbitsU2TX.U2TXIS = 0;
IECbitsU2RX.U2RXIE = 1;
#else /* defined __PIC32MZ__ */
IPCbitsU2.U2IP = KERNEL_INTERRUPT_PRIORITY + 0;
IPCbitsU2.U2IS = 0;
IECbitsU2RX.U2RXIE = 1;
#endif /* defined __PIC32MZ__ */
#endif /* 0 */
break;
#endif /* SERIAL_PORTS >= 2 */
#if SERIAL_PORTS >= 3
case 3:
SERIALINIT( 3 );
if( UserConfigUART3 != NULL )
UserConfigUART3();
break;
#endif /* SERIAL_PORTS >= 3 */
#if SERIAL_PORTS >= 4
case 4:
SERIALINIT( 4 );
if( UserConfigUART4 != NULL )
UserConfigUART4();
break;
#endif /* SERIAL_PORTS >= 4 */
#if SERIAL_PORTS >= 5
case 5:
SERIALINIT( 5 );
if( UserConfigUART5 != NULL )
UserConfigUART5();
break;
#endif /* SERIAL_PORTS >= 5 */
#if SERIAL_PORTS >= 6
case 6:
SERIALINIT( 6 );
if( UserConfigUART6 != NULL )
UserConfigUART6();
break;
#endif /* SERIAL_PORTS >= 6 */
}
return 1;
}
/*============================================================================*/
int SerialReceive( unsigned int port, tickcount_t TimeToWait )
{
unsigned char c;
if( port < 1 || port > SERIAL_PORTS )
return -2;
if( QueueRead( &QueuesRX[port-1], &c, TimeToWait ))
return (unsigned int)c;
else
return -1;
}
/*============================================================================*/
int SerialWaitForTXCompletion( unsigned int port, tickcount_t TimeToWait )
{
return 0;
}
/*============================================================================*/
int SerialTransmit( unsigned int port, signed char c, tickcount_t TimeToWait )
{
if( port < 1 || port > SERIAL_PORTS )
return -2;
/* Return false if after the block time there is no room on the Tx queue. */
if( QueueWrite( &QueuesTX[port-1], &c, TimeToWait ) == 0 )
return 0;
else
{
if( port == 1 )
IECbitsU1TX.U1TXIE = 1;
#if SERIAL_PORTS >= 2
else if( port == 2 )
IECbitsU2TX.U2TXIE = 1;
#endif /* SERIAL_PORTS >= 2 */
#if SERIAL_PORTS >= 3
else if( port == 3 )
IECbitsU3TX.U3TXIE = 1;
#endif /* SERIAL_PORTS >= 3 */
#if SERIAL_PORTS >= 4
else if( port == 4 )
IECbitsU4TX.U4TXIE = 1;
#endif /* SERIAL_PORTS >= 4 */
#if SERIAL_PORTS >= 5
else if( port == 5 )
IECbitsU5TX.U5TXIE = 1;
#endif /* SERIAL_PORTS >= 5 */
#if SERIAL_PORTS >= 6
else if( port == 6 )
IECbitsU6TX.U6TXIE = 1;
#endif /* SERIAL_PORTS >= 6 */
return 1;
}
return 0;
}
/*============================================================================*/
#define IMPLEMENTVECTOR(p,v,n) \
void __attribute__(( vector( _UART##v##_VECTOR ), interrupt, nomips16, naked )) U##n##Vector( void ) \
{ \
asm volatile( \
".extern SaveContext \r\n" \
".extern RestoreContext \r\n" \
\
"addiu $sp,$sp,-8 \r\n" \
"sw $ra,4($sp) \r\n" \
\
"jal SaveContext \r\n" \
"nop \r\n" \
/*------------------------------------------------------------*/ \
"jal U" #p "Handler \r\n" \
"nop \r\n" \
/*------------------------------------------------------------*/ \
"j RestoreContext \r\n" \
"nop \r\n" \
/*------------------------------------------------------------*/ \
); \
}
/*============================================================================*/
#define IMPLEMENTRXHANDLER(p) \
/* Are any Rx interrupts pending? */ \
if( IFSbitsU##p##RX.U##p##RXIF == 1 && IECbitsU##p##RX.U##p##RXIE == 1 )\
{ \
while( U##p##STAbits.URXDA ) \
{ \
/* Retrieve the received character and place it in the queue of \
received characters. */ \
cChar = U##p##RXREG; \
if( QueueWriteFromISR( &QueuesRX[p-1], &cChar ) > 1 ) \
MustSwitch = 1; \
} \
IFSbitsU##p##RX.U##p##RXIF = 0; \
}
/*============================================================================*/
#define IMPLEMENTTXHANDLER(p) \
/* Are any Tx interrupts pending? */ \
if( IFSbitsU##p##TX.U##p##TXIF == 1 && IECbitsU##p##TX.U##p##TXIE == 1 )\
{ \
while( U##p##STAbits.UTXBF == 0 ) \
{ \
int Result; \
\
Result = QueueReadFromISR( &QueuesTX[p-1], &cChar ); \
if( Result > 0 ) \
{ \
/* Send the next character queued for Tx. */ \
U##p##TXREG = cChar; \
if( Result > 1 ) \
MustSwitch = 1; \
} \
else \
{ \
/* Queue empty, nothing to send. */ \
/*IFSbitsU##p.U##p##TXIF = 0;*/ \
IECbitsU##p##TX.U##p##TXIE = 0; \
break; \
} \
} \
\
if( U##p##STAbits.UTXBF != 0 ) \
IFSbitsU##p##TX.U##p##TXIF = 0; \
}
/*============================================================================*/
#if defined __PIC32MX__
/*============================================================================*/
#define DECLAREVECTOR(p) \
IMPLEMENTVECTOR(p,_##p,p)
#define DECLAREHANDLER(p) \
void U##p##Handler( void ) \
{ \
int MustSwitch = 0; \
static char cChar; \
\
IMPLEMENTRXHANDLER(p) \
IMPLEMENTTXHANDLER(p) \
\
if( MustSwitch ) \
CurrentTask = ReadyTasks[HighestReadyPriority]; \
}
/*============================================================================*/
#elif defined __PIC32MZ__
/*============================================================================*/
#define DECLAREVECTOR(p) \
IMPLEMENTVECTOR(p##_RX,p##_RX,p##RX) \
IMPLEMENTVECTOR(p##_TX,p##_TX,p##TX)
#define DECLAREHANDLER(p) \
void U##p##_RXHandler( void ) \
{ \
int MustSwitch = 0; \
static char cChar; \
\
IMPLEMENTRXHANDLER(p) \
\
if( MustSwitch ) \
CurrentTask = ReadyTasks[HighestReadyPriority]; \
} \
\
void U##p##_TXHandler( void ) \
{ \
int MustSwitch = 0; \
static char cChar; \
\
IMPLEMENTTXHANDLER(p) \
\
if( MustSwitch ) \
CurrentTask = ReadyTasks[HighestReadyPriority]; \
}
/*============================================================================*/
#endif /* defined __PIC32MX__ */
/*============================================================================*/
#if SERIAL_PORTS >= 1
DECLAREVECTOR(1)
DECLAREHANDLER(1)
#endif /* SERIAL_PORTS >= 1 */
#if SERIAL_PORTS >= 2
#if 0
DECLAREVECTOR(2)
DECLAREHANDLER(2)
#else /* 0 */
#if defined __PIC32MZ__
void __attribute__(( vector( _UART2_RX_VECTOR ), interrupt, nomips16, naked )) U2RXVector( void )
{
asm volatile(
".extern SaveContext \r\n"
".extern RestoreContext \r\n"
"addiu $sp,$sp,-8 \r\n"
"sw $ra,4($sp) \r\n"
"jal SaveContext \r\n"
"nop \r\n"
/*------------------------------------------------------------*/
"jal U2RXHandler \r\n"
"nop \r\n"
/*------------------------------------------------------------*/
"j RestoreContext \r\n"
"nop \r\n"
/*------------------------------------------------------------*/
);
}
void __attribute__(( vector( _UART2_TX_VECTOR ), interrupt, nomips16, naked )) U2TXVector( void )
{
asm volatile(
".extern SaveContext \r\n"
".extern RestoreContext \r\n"
"addiu $sp,$sp,-8 \r\n"
"sw $ra,4($sp) \r\n"
"jal SaveContext \r\n"
"nop \r\n"
/*------------------------------------------------------------*/
"jal U2TXHandler \r\n"
"nop \r\n"
/*------------------------------------------------------------*/
"j RestoreContext \r\n"
"nop \r\n"
/*------------------------------------------------------------*/
);
}
void U2RXHandler( void )
{
int MustSwitch = 0;
static char cChar;
/* Are any Rx interrupts pending? */
if( IFSbitsU2RX.U2RXIF == 1 && IECbitsU2RX.U2RXIE == 1 )
{
while( U2STAbits.URXDA )
{
/* Retrieve the received character and place it in the queue of
received characters. */
cChar = U2RXREG;
if( QueueWriteFromISR( &QueuesRX[2-1], &cChar ) > 1 )
MustSwitch = 1;
}
IFSbitsU2RX.U2RXIF = 0;
}
if( MustSwitch )
CurrentTask = ReadyTasks[HighestReadyPriority];
}
void U2TXHandler( void )
{
int MustSwitch = 0;
static char cChar;
/* Are any Tx interrupts pending? */
if( IFSbitsU2TX.U2TXIF == 1 && IECbitsU2TX.U2TXIE == 1 )
{
while( U2STAbits.UTXBF == 0 )
{
int Result;
Result = QueueReadFromISR( &QueuesTX[2-1], &cChar );
if( Result > 0 )
{
/* Send the next character queued for Tx. */
U2TXREG = cChar;
if( Result > 1 )
MustSwitch = 1;
}
else
{
/* Queue empty, nothing to send. */
/*IFSbitsU##p.U##p##TXIF = 0;*/
IECbitsU2TX.U2TXIE = 0;
break;
}
}
if( U2STAbits.UTXBF != 0 )
IFSbitsU2TX.U2TXIF = 0;
}
if( MustSwitch )
CurrentTask = ReadyTasks[HighestReadyPriority];
}
#else /* defined __PIC32MZ__ */
void __attribute__(( vector( _UART_2_VECTOR ), interrupt, nomips16, naked )) U2Vector( void )
{
asm volatile(
".extern SaveContext \r\n"
".extern RestoreContext \r\n"
"addiu $sp,$sp,-8 \r\n"
"sw $ra,4($sp) \r\n"
"jal SaveContext \r\n"
"nop \r\n"
/*------------------------------------------------------------*/
"jal U2Handler \r\n"
"nop \r\n"
/*------------------------------------------------------------*/
"j RestoreContext \r\n"
"nop \r\n"
/*------------------------------------------------------------*/
);
}
void U2Handler( void )
{
int MustSwitch = 0;
static char cChar;
if( IFSbitsU2RX.U2RXIF == 1 && IECbitsU2RX.U2RXIE == 1 )
{
while( U2STAbits.URXDA )
{
/* Retrieve the received character and place it in the queue of
received characters. */
cChar = U2RXREG;
if( QueueWriteFromISR( &QueuesRX[2-1], &cChar ) > 1 )
MustSwitch = 1;
}
IFSbitsU2RX.U2RXIF = 0;
}
/* Are any Tx interrupts pending? */
if( IFSbitsU2TX.U2TXIF == 1 && IECbitsU2TX.U2TXIE == 1 )
{
while( U2STAbits.UTXBF == 0 )
{
int Result;
Result = QueueReadFromISR( &QueuesTX[2-1], &cChar );
if( Result > 0 )
{
/* Send the next character queued for Tx. */
U2TXREG = cChar;
if( Result > 1 )
MustSwitch = 1;
}
else
{
/* Queue empty, nothing to send. */
/*IFSbitsU##p.U##p##TXIF = 0;*/
IECbitsU2TX.U2TXIE = 0;
break;
}
}
if( U2STAbits.UTXBF != 0 )
IFSbitsU2TX.U2TXIF = 0;
}
if( MustSwitch )
CurrentTask = ReadyTasks[HighestReadyPriority];
}
#endif /* defined __PIC32MZ__ */
#endif /* 0 */
#endif /* SERIAL_PORTS >= 2 */
#if SERIAL_PORTS >= 3
DECLAREVECTOR(3)
DECLAREHANDLER(3)
#endif /* SERIAL_PORTS >= 3 */
#if SERIAL_PORTS >= 4
DECLAREVECTOR(4)
DECLAREHANDLER(4)
#endif /* SERIAL_PORTS >= 4 */
#if SERIAL_PORTS >= 5
DECLAREVECTOR(5)
DECLAREHANDLER(5)
#endif /* SERIAL_PORTS >= 5 */
#if SERIAL_PORTS >= 6
DECLAREVECTOR(6)
DECLAREHANDLER(6)
#endif /* SERIAL_PORTS > 6 */
/*============================================================================*/
#if 0 /*defined __DEBUG*/
#if defined __MPLAB_DEBUGGER_SIMULATOR || defined SIMULATED_UART
static const char Packet[] = { 'v', 's', 'k', 'v', 'd', 'k', 'v', 'k', 'v', 's', 'k', 'd' };
static int ip = 0;
void __attribute__(( vector( _TIMER_2_VECTOR ), interrupt, nomips16, naked ))T2Vector( void )
{
asm volatile(
".extern SaveContext \r\n"
".extern RestoreContext \r\n"
"addiu $sp,$sp,-8 \r\n"
"sw $ra,4($sp) \r\n"
"jal SaveContext \r\n"
"nop \r\n"
/*------------------------------------------------------------*/
"jal T2Handler \r\n"
"nop \r\n"
/*------------------------------------------------------------*/
"j RestoreContext \r\n"
"nop \r\n"
/*------------------------------------------------------------*/
);
}
void T2Handler( void )
{
int MustSwitch = 0;
char c = Packet[ip];
if( ++ip >= sizeof Packet )
ip = 0;
/*INTClearFlag( INT_T2 );*/ /* clear the interrupt flag */
IFS0bits.T2IF = 0;
if( QueueWriteFromISR( &QueuesRX[1], &c ) > 1 )
MustSwitch = 1;
/*
if( QueueReadFromISR( &QueuesTX[0], &c ) > 1 )
MustSwitch = 1;
*/
if( MustSwitch )
CurrentTask = ReadyTasks[HighestReadyPriority];
}
#endif /* defined __MPLAB_DEBUGGER_SIMULATOR || defined SIMULATED_UART */
#endif /* defined __DEBUG */
/*============================================================================*/
#endif /* defined __XC32__ || defined __C32_VERSION__ */
/*============================================================================*/
| file: /Techref/member/IMB-yahoo-J86/SerialPIC32MX.c.htm, 35KB, , updated: 2016/1/14 19:50, local time: 2024/12/26 14:32,
owner: IMB-yahoo-J86,
3.17.175.167:LOG IN
|
| ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://sxlist.com/Techref/member/IMB-yahoo-J86/SerialPIC32MX.c.htm"> A simple RTOS for microcontrollers based upon concepts of FreeRTOS</A> |
| Did you find what you needed? |