please dont rip this site

fig-forth 1.1g for Z80

Featured on the Hackaday SuperConference badge computer under the menu option 2. Z80 CPM. FORTH is on the B drive, but it is missing the screen files and so there is no effective way to edit or save new words. After some searching, the files appear to have been found at:
http://www.ep128.hu/Ep_Util/Ep_Util_eng.htm

Screens:

To load the screen files onto the badge, follow the directions at:
https://hackaday.io/project/161859-2018-hackaday-superconference-badge/log/154556-serial-communications-with-badge

Connect a USB to serial converter to the badge pins: C13 to TX, C14 to RX. Connect ground but not power. Assuming your favorite serial terminal program supports XMODEM, set it to 19200 N 8 1 and configure a LF after CR. Reset the badge (hold both shifts, press RESET) then switch to serial terminal mode (hold both shifts, press BRK/COL). Select option 2 (press Enter or Ctrl+Enter). At the command prompt, enter

xmdm r D:FILENAME.EXT

where FILENAME.EXT is the name of the file you are transferring. From the PC, start the transfer.

Once the files are there, enter

B:
FORTH D:STARTUP.FRT

Note: You can NOT switch back and forth from the serial to local console, so you must complete the file transfers in one sesson. If you power off, you have to reset and start over.

To exit FORTH back to CP/M, the command is BYE

Manual: fig-Forth step by step (1990) Translated from Hungarian via Google, and with a few notes and corrections.

Source:

P! and P@ words do port IO via the OUT and IMP instructions. Search the .ASM file for ";P@" to find the code. There is also a note: "The port I/O words P@ & P! have been made ROMable by use of Z80 instructions." However, the Z80 Emulator on the badge does NOT support IO to the onboard devices other than the keyboard / screen, serial console, and drives. A feature request with link to the source has been raised:
https://github.com/Hack-a-Day/2018-Supercon-Badge/issues/24

Questions:

See also:


file: /Techref/language/FORTH/z80fig-Forth1_1g.htm, 3KB, , updated: 2020/5/29 19:20, local time: 2024/12/23 07:41,
TOP NEW HELP FIND: 
3.144.3.235:LOG IN

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF="http://sxlist.com/Techref/language/FORTH/z80fig-Forth1_1g.htm"> z80 fig-Forth1.1g</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?

 

Welcome to sxlist.com!


Site supported by
sales, advertizing,
& kind contributors
just like you!

Please don't rip/copy
(here's why

Copies of the site on CD
are available at minimal cost.
 

Welcome to sxlist.com!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .