In general, the Linistepper and SLAm drivers will do best with strong low amperage, higher voltage motors. E.g. a 12 Volt, 1 Amp motor is better than a 1 Volt, 12 Amp motor. Remember: For these drivers, only Unipolar (5 or more wires)!.
The THB6064AH driver is a Bi-Polar driver which will work nicely with the faster, high amperage, lower voltage motors. Remember: For Bi-Polar drivers, you can NOT use 5 wire motors; 4, 6 or 8 only.
You can generally find these on ebay: > 100oz-in (but avoid knock offs from China), > 200oz-in or Google >100oz-in, >200oz-in. or, in the table below, click on the "Find For" link to search for that motors mfgr and part.
Also: Good DC Motors
Some of the motors below list the models of printer, copier, fax, etc... where they might be found. If you ask around at computer or office equipment repair places, and offer to remove old dead equipment for them (be sure to check with your local disposal agency for how to do that properly and legally first) you may be able to score some nice motors for nothing. Some places will even let you browse what they already have on the trash list or let you know when they receive another one on the list. Be sure to let us know if you find something that isn't already on our list by filling out the form below? Of course, dismantling equipment does require care: Wear gloves, and watch our for sharp metal frame edges and broken bits of plastic. Also keep away from toner; wear a mask if it's been spilled.
The NEMA number is about 10 times the size (diameter or side) of the motor in inches. E.g. a NEMA 23 motor is about 2.3".
Suggest a new motor by filling out this form:
See also:
Also:
Lin Engineering 5618L-54
Lin Engineering 5718M-15-09
Lin Engineering 4118L-07
Anaheim Automation 23L004S-LW8
Kysan 57BYG070
Kysan 57BYGH211
Salem Controls SC23-57BYGH803
ORM 264K-2
Vexta PK266-02A
XUQUAN 23H256-30-6B
Sanyo Denki^ 103H546-0440
Sanyo Denki 103H7126-0941 (as found in Toshiba photocopiers; models: 7550, 6560, 6560, 5540.)
Sanyo Denki 103H7126-1441 (as found in Xerox XDL33D photocopier )
Shinano SST42D1040
Shinano SST42D1041
Shinano SST42D1020
Shinano SST42D1021
Shinano SST42D2040
Shinano SST42D2041
Shinano SST42D2030
Shinano SST42D2031
file: /Techref/io/stepper/linistep/motors.htm, 5KB, , updated: 2018/3/19 16:01, local time: 2024/8/14 21:30,
3.140.196.3:LOG IN
|
©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://sxlist.com/Techref/io/stepper/linistep/motors.htm"> Good Stepper Motors</A> |
Did you find what you needed? |
Welcome to sxlist.com!sales, advertizing, & kind contributors just like you! Please don't rip/copy (here's why Copies of the site on CD are available at minimal cost. |
Ashley Roll has put together a really nice little unit here. Leave off the MAX232 and keep these handy for the few times you need true RS232! |
.