please dont rip this site

Ubicom SX Embedded Controller Instruction Set

In OPCODE order

Mnemonic,      Description                       Cycles     Status    12-Bit Opcode	      
   Operands                                      /Turbo     Affected  MSB         LSB     Notes
===============================================================================================
NOP     -      No Operation                        1        None      0000  0000  0000        
GetOption      Moves OPTION register to W          1        ?         0000  0000  0001
OPTION  k      Load OPTION register with W         1        None      0000  0000  0010        
SLEEP   -      Power down WDT=0, Pre=0, TO=1, PD=0 1        TO,PD     0000  0000  0011         
CLRWDT  k      Clear Watchdog Timer                1        TO,PD     0000  0000  0100         
TRIS    f      Move W into Port Control Register   1        None      0000  0000  0fff    3
                                                                      0000  0000  10xx 4 unknowns
RET     -      Return without affecting W          2/3      None      0000  0000  1100        
RETP    -      Ret, W unchanged, Pop PA2,PA1,PA0   2/3      PA2/1/0   0000  0000  1101      
RETI    -      Ret fr int. Pop PC, W, STATUS, FSR  2/3  All but TO,PD 0000  0000  1110         
RETIW   -      RETI and add W to RTCC              2/3  All but TO,PD 0000  0000  1111         
PAGE    n      Write n into PA2, PA1 and PA0       1        PA2/1/0   0000  0001  0nnn    5
BANK    n      Write n into FSR7, FSR6 and FSR5    1        None      0000  0001  1nnn    5  
MOVWF   f      Move W to f                         1        None      0000  001f  ffff    1,4
CLRW    -      Clear W                             1        Z         0000  0100  0000     
IREAD   -      Read word at (MODE:W) into MODE:W   1/4      None      0000  0100  0001        
MOVMW   -      Read MODE bits into W. (Hi nib=0)   1        None      0000  0100  0010        
MOVWM   -      Write W into MODE register          1        None      0000  0100  0011
Debug   -      Puts SX into debug mode             1        ?         0000  0100  0100 secret
OscIO   -      Rotates OSC pin through W           1        ?         0000  0100  0101 secret
SetBreak       Sets the break point register       1        ?         0000  0100  0110 secret
                                                                      0000  0100  0111 unknown
PushW   -      Push W to W stack                   1        ?         0000  0100  1000 secret
PushSTAT-      Push W to the Status stack          1        ?         0000  0100  1001 secret
PushFSR -      Push W to the FSR stack             1        ?         0000  0100  1010 secret
FIFO    -      W is cycled thru an 8 level FIFO    1        ?         0000  0100  1011 secret
PopW    -      Pop W from the W stack              1        ?         0000  0100  1100 secret
PopSTAT -      Pop Status from the W stack         1        ?         0000  0100  1101 secret
PopFSR  -      Pop W from the FSR stack            1        ?         0000  0100  1110 secret
                                                                      0000  0100  1111 unknown
MODE    n      Write n into MODE register          1        None      0000  0101  nnnn        
CLRF    f      Clear f                             1        Z         0000  011f  ffff    4
SUBWF   f,d    Subtract W from f (Different on SX) 1        C,DC,Z    0000  10df  ffff    1,2,4
DECF    f,d    Decrement f                         1        Z         0000  11df  ffff    2,4
IORWF   f,d    Inclusive OR W with f               1        Z         0001  00df  ffff    2,4
ANDWF   f,d    AND W with f                        1        Z         0001  01df  ffff    2,4
XORWF   f,d    Exclusive OR W with f               1        Z         0001  10df  ffff    2,4
ADDWF   f,d    Add W and f                         1        C,DC,Z    0001  11df  ffff    1,2,4
MOVF    f,d    Move f                              1        Z         0010  00df  ffff    2,4
COMF    f,d    Complement f                        1        Z         0010  01df  ffff     
INCF    f,d    Increment f                         1        Z         0010  10df  ffff    2,4
DECFSZ  f,d    Decrement f, Skip if 0              1(2)     None      0010  11df  ffff    2,4
RRF     f,d    Rotate right f through Carry        1        C         0011  00df  ffff    2,4
RLF     f,d    Rotate left f through Carry         1        C         0011  01df  ffff    2,4
SWAPF   f,d    Swap f                              1        None      0011  10df  ffff    2,4
INCFSZ  f,d    Increment f, Skip if 0              1(2)     None      0011  11df  ffff    2,4
BCF     f,b    Bit Clear f                         1        None      0100  bbbf  ffff    2,4
BSF     f,b    Bit Set f                           1        None      0101  bbbf  ffff    2,4
BTFSC   f,b    Bit Test f, Skip if Clear           1(2)     None      0110  bbbf  ffff        
BTFSS   f,b    Bit Test f, Skip if Set             1(2)     None      0111  bbbf  ffff        
RETLW   k      Return (fr subr) move Literal to W  2/3      None      1000  kkkk  kkkk        
CALL    k      Call subroutine                     2/3      None      1001  kkkk  kkkk    1
GOTO    k      Unconditional branch                2/3      None      101k  kkkk  kkkk        
MOVLW   k      Move Literal to W                   1        None      1100  kkkk  kkkk        
IORLW   k      Inclusive OR Literal with W         1        Z         1101  kkkk  kkkk     
ANDLW   k      AND Literal with W                  1        Z         1110  kkkk  kkkk     
XORLW   k      Exclusive OR Literal to W           1        Z         1111  kkkk  kkkk   

Notes:

Abbreviations:

b = bit 0..7 in f
C = carry status bit
d = destination: W or f (d=0 for W, d=1 for f)
DC = digit carry status bit
FSR = file select register
f = file register (RAM)
k = 8-bit constant (literal) (256)
n = constant
PA = page select status bits (n = 0,1,2)
PD = power-down (sleep-mode) status bit (true low)
TO = watchdog timer time-out status bit (true low)
W = working register (accumulator)
Z = zero status bit

file: /Techref/scenix/opcodes.htm, 8KB, , updated: 2005/2/4 18:02, local time: 2024/11/24 01:58,
TOP NEW HELP FIND: 
3.147.82.252:LOG IN

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF="http://sxlist.com/TECHREF/scenix/opcodes.htm"> Ubicom SX Embedded Controller Instruction Set In OPCODE order</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?

 

Welcome to sxlist.com!


Site supported by
sales, advertizing,
& kind contributors
just like you!

Please don't rip/copy
(here's why

Copies of the site on CD
are available at minimal cost.
 

Welcome to sxlist.com!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .