AppInfoSeg MACRO ;******************************************************************************** ; APP LAYER ;******************************************************************************** ; Updated 6 Decembet 1999 - Nick Kelsey ; * TransApp: Increased UART buffer size from 7 to 16 bytes. ; * TransApp: Added flow control for UART receive. ;******************************************************************************** ; ; lmp2appRxCommData(w = Data) ;Incomming data bytes ; lmp2appRxCommValid() ;Data bytes passed since last Valid/Error message are valid ; lmp2appRxCommError() ;Data bytes passed since last Valid/Error message are invalid and should be discarded ; ; lmp2appTxCommStart(ret z=None) ;Data bytes can now be sent, Return Z=false if data to be sent ; lmp2appTxCommData(ret w=TxData, z=Last) ;Data bytes can now be sent. Set Z if this is the last byte to be sent ; lmp2appTxCommValid() ;All data passed since last Valid/Error message were acknowledged as received by the remote station ; lmp2appTxCommError() ;All data passed since last Valid/Error message were discarded and will need to be sent again ; ; lap2appRxUIData(w = Data) ;Incomming UI data bytes (outside of a connection only) ; lap2appRxUIValid() ;Data bytes passed since last Valid/Error message are valid ; lap2appRxUIError() ;Data bytes passed since last Valid/Error message are invalid and should be discarded ; ; app2lapTxUIFrame(ret z=Busy) ; lap2appTxUIData(ret w=TxData, z=Last) ; lap2appTxUIComplete() ; ; app2lapDiscoveryRequest(ret z=Busy) ; ;******************************************************************************** ENDM AppCommSX2PCCodeSeg MACRO ;******************************************************************************** ; APP LAYER - CommSX2PC ;******************************************************************************** appBank = $F0 appTxState = appBank + 0 ;Current transmission type appTxPosition = appBank + 1 ;Current transmission position appTxBank = appBank + 2 ;Current transmission position appRxData = appBank + 3 ;Current received byte appTxStrState = 1 appTxRegState = 2 appTxPortState = 3 ;********** Return ********** appReturn retp ;********** a2appReset ********** a2appReset bank appBank clr appTxState retp ;********** lmp2appRxCommData ********** lmp2appRxCommData ;Incomming data bytes bank appBank mov appRxData, w ;Store data (if more bytes are received in frame then only last byte is reconised) retp ;********** lmp2appRxCommValid ********** lmp2appRxCommValid ;Data bytes passed since last Valid/Error message are valid bank appBank test appTxState ;Currently not sending anything ? sz retp ;Already sending a frame => ignore command debugf 1, appRxData ;Show command out debug port csne appRxData, #'?' ;Is the command '?' ? jmp :Str ;Yes => prepare to transmit a string csne appRxData, #'r' ;Is the command 'r' ? jmp :Reg ;Yes => prepare to transmit registers csne appRxData, #'c' ;Is the command 'c' ? jmp :Port ;Yes => prepare to transmit port c contents retp :Str mov appTxState, #appTxStrState ;Will send string retp :Reg mov appTxState, #appTxRegState ;Will send registers clr appTxBank ;Clear TxBank ready for transmission retp :Port mov appTxState, #appTxPortState ;Will send port c retp ;********** lmp2appRxCommError ********** lmp2appRxCommError ;Data bytes passed since last Valid/Error message are invalid and should be discarded retp ;********** lmp2appTxCommStart ********** lmp2appTxCommStart ;Data bytes can now be sent. Return Z = flase if data to be sent bank appBank clr appTxPosition ;Clear TxPosition ready for transmission test appTxState ;Return z=false if TxState not 0 to indicate data to be sent retp ;********** lmp2appTxCommData ********** lmp2appTxCommData ;Data bytes can now be sent. If there is data available then return data byte and set Last (z) to false bank appBank mov w, appTxState ;Jump based on state jmp PC+w retp ;0 = Invalid jmp appTxStrData ;1 = appTxStrState jmp appTxRegData ;2 = appTxRegState jmp appTxPortData ;3 = appTxPortState appTxStrData mov m, #_lmpIASDeviceNameText / 256 ;Pointer to string (high) mov w, #_lmpIASDeviceNameText ;Pointer to string (low) add w, appTxPosition ;index into string inc appTxPosition ;Increment offset for next byte iread ;Read data from ROM mov Temp, w ;Store data mov w, m ;Move high part of data to w test w ;Is this the last byte ? jnz :Last ;Yes => indicate last :More mov w, Temp ;No => indicate more. Recover data to pass clz ;Indicate more data to follow Data retp ;Return data :Last mov w, Temp ;Data to pass stz ;Indicate last byte retp ;Return data appTxRegData mov w, #$10 ;w = $10 add w, appTxBank ;w = current bank (starting from $10) add w, appTxPosition ;w = pointer to current register mov FSR, w ;Apply pointer mov Temp, INDF ;Obtain data from register bank appBank csne appTxPosition, #$0F ;Last byte to be transmitted in frame ? jmp :Last ;Yes => indicate last :More inc appTxPosition ;No => indicate more. Increment position fo next data byte mov w, Temp ;Recover data to send clz ;Indicate more data to follow retp :Last mov w, Temp ;Recover data to send stz ;Indicate last byte retp appTxPortData mov w, rc ;Return contents of port c stz ;Indicate no more data to send retp ;Return data ;********** lmp2appTxCommValid ********** lmp2appTxCommValid ;All data passed since last Valid/Error message were acknowledged as received by the remote station bank appBank csne appTxState, #appTxRegState ;Currently transmitting registers ? jmp :Reg ;Yes => send more registers (multi frame) clr appTxState ;No => finished transmitting, return to idle state retp :Reg add appTxBank, #$20 ;Add $20 for next bank sz ;Back to starting bank ? retp ;No => more data to send, stay in this state clr appTxState ;Yes => finished transmitting, return to idle state retp ;********** lmp2appTxCommError ********** lmp2appTxCommError ;All data passed since last Valid/Error message were discarded and will need to be sent again retp ;Stay in current state for retransmission ;********** UI Frames ********** lap2appRxUIData = appReturn lap2appRxUIValid = appReturn lap2appRxUIError = appReturn lap2appTxUIData = appReturn lap2appTxUIComplete = appReturn ;********** Uart ********** a2appRxAvail bank IsrBank clrb UartRxAvail ;Clear flag retp ;******************************************************************************** ENDM AppCommTransCodeSeg MACRO ;******************************************************************************** ; APP LAYER - CommTrans ;******************************************************************************** appBank = $D0 ;Local variables appData = $F0 ;16-byte buffer appHeadPtr = appBank + 0 ;1 byte appTailPtr = appBank + 1 ;1 byte ;********** Return ********** appReturn retp ;********** a2appReset ********** a2appReset bank appBank clr appHeadPtr ;Init buffer head pointer clr appTailPtr ;Init buffer tail pointer clrb UartCtsPin ;Indicate CTS to PC - ready to accept more data retp ;********** lmp2appRxCommData ********** lmp2appRxCommData ;Incomming data bytes debug 1 ;Show data out debug port retp ;********** lmp2appRxCommValid ********** lmp2appRxCommValid ;Data bytes passed since last Valid/Error message are valid retp ;********** lmp2appRxCommError ********** lmp2appRxCommError ;Data bytes passed since last Valid/Error message are invalid and should be discarded retp ;********** lmp2appTxCommStart ********** lmp2appTxCommStart ;Data bytes can now be sent. Return Z = flase if data to be sent bank appBank mov w, appHeadPtr ;Compare head pointer with tail pointer xor w, appTailPtr ;Z is true if they match => indicating no data to send retp ;Z is false if they do not match indicating data to send ;********** lmp2appTxCommData ********** lmp2appTxCommData ;Data bytes can now be sent. If there is data available then return data byte and set Last (z) to false bank appBank mov w, appTailPtr ;Index into buffer and w, #%00001111 ;16 byte buffer xor w, #appData ;Add pointer to first byte of data mov FSR, w ;Apply pointer mov Temp, INDF ;Read byte out of buffer bank appBank inc appTailPtr ;move on tail ptr mov w, appHeadPtr ;Compare head pointer with tail pointer xor w, appTailPtr ;Do they match (indicating no more data) jz :Last ;Yes => no more data :More mov w, Temp ;No => more data. Recover data clz ;Indicate more data to follow retp ;Return data :Last mov w, Temp ;Recover data clrb UartCtsPin ;Indicate CTS to PC - ready to accept more data stz ;Indicate last byte retp ;Return data ;********** lmp2appTxCommValid ********** lmp2appTxCommValid ;All data passed since last Valid/Error message were acknowledged as received by the remote station retp ;********** lmp2appTxCommError ********** lmp2appTxCommError ;All data passed since last Valid/Error message were discarded and will need to be sent again retp ;********** UI Frames ********** lap2appRxUIData = appReturn lap2appRxUIValid = appReturn lap2appRxUIError = appReturn lap2appTxUIData = appReturn lap2appTxUIComplete = appReturn ;********** Uart ********** a2appRxAvail setb UartCtsPin ;Indicate NOT CTS after 1st byte (PC will send 16 bytes after loosing CTS!) bank IsrBank mov Temp, UartRxData ;Store received byte in buffer clrb UartRxAvail ;Clear flag bank appBank mov w, appHeadPtr ;Index into buffer and w, #%00001111 ;16 byte buffer xor w, #appData ;Add pointer to first byte of data mov FSR, w ;Apply pointer mov INDF, Temp ;Store data bank appBank inc appHeadPtr ;Record count retp ;******************************************************************************** ENDM AppSX2SXCodeSeg MACRO ;******************************************************************************** ; APP LAYER - SX 2 SX ;******************************************************************************** appBank = $F0 appTxState = appBank + 0 ;Current transmission type appTxPosition = appBank + 1 ;Current transmission position appTxStrState = 1 appTxPortState = 2 ;********** Return ********** appReturn retp ;********** a2appReset ********** a2appReset bank appBank clr appTxState retp ;********** lmp2appCommData ********** lmp2appRxCommData = appReturn lmp2appRxCommValid = appReturn lmp2appRxCommError = appReturn lmp2appTxCommData = appReturn lmp2appTxCommValid = appReturn lmp2appTxCommError = appReturn lmp2appTxCommStart stz retp ;********** UI Frames - Rx ********** lap2appRxUIData debug 1 ;Show data retp lap2appRxUIValid retp lap2appRxUIError retp ;********** UI Frames - Tx ********** lap2appTxUIData bank appBank mov w, appTxState ;Jump based on state jmp PC+w retp ;0 = Invalid jmp appTxStrData ;1 = appTxStrState jmp appTxPortData ;2 = appTxPortState appTxStrData mov m, #_lmpIASDeviceNameText / 256 ;Pointer to string (high) mov w, #_lmpIASDeviceNameText ;Pointer to string (low) add w, appTxPosition ;index into string inc appTxPosition ;Increment offset for next byte iread ;Read data from ROM mov Temp, w ;Store data mov w, m ;Move high part of data to w test w ;Is this the last byte ? jnz :Last ;Yes => indicate last :More mov w, Temp ;No => indicate more. Recover data to pass clz ;Indicate more data to follow Data retp ;Return data :Last mov w, Temp ;Data to pass stz ;Indicate last byte retp ;Return data appTxPortData mov w, rc ;Return contents of port c stz ;Indicate no more data to send retp ;Return data lap2appTxUIComplete bank appBank retp ;********** Uart ********** a2appRxAvail bank IsrBank mov Temp, UartRxData ;Store received byte in Temp clrb UartRxAvail ;Clear data available flag bank appBank debugf 1, Temp ;Show command csne Temp, #'d' ;Was the byte a 'd' jmp :XID ;Yes => request discovery csne Temp, #'s' ;Was the byte a 's' jmp :STR ;Yes => send the broadcast string csne Temp, #'c' ;Was the byte a 'c' jmp :PORT ;Yes => send contents of port c retp :XID call @app2lapDiscoveryRequest ;Request discovery mov w, #'^' ;Assume accepted (zero false) snz ;Was the request accepted ? mov w, #'!' ;No => refused debug 1 ;Send character out the debug port for the user retp :STR mov appTxState, #appTxStrState ;Will send string clr appTxPosition ;Reset position jmp :Send :PORT mov appTxState, #appTxPortState ;Will send port :Send call @app2lapTxUIStart mov w, #'^' ;Assume accepted (zero false) snz ;Was the request accepted ? mov w, #'!' ;No => refused debug 1 ;Send character out the debug port for the user retp ;******************************************************************************** ENDM
| file: /Techref/scenix/lib/io/osi2/ir/da/App.src, 13KB, , updated: 1999/12/6 15:50, local time: 2024/12/27 03:20,
18.221.147.141:LOG IN
|
| ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://sxlist.com/TECHREF/scenix/lib/io/osi2/ir/da/App.src"> scenix lib io osi2 ir da App</A> |
| Did you find what you needed? |
Welcome to sxlist.com!sales, advertizing, & kind contributors just like you! Please don't rip/copy (here's why Copies of the site on CD are available at minimal cost. |
Welcome to sxlist.com! |
.