SX Embedded Controller Instruction

JMP addr
Description:	Jump to (9 bit) address
Operation:	PC = ( page << 9 ) + addr
Flags affected:	none
Registers affected:	PC
Sources referenced:	-
Cycles:	2 (compatible) or 3 (turbo)
Opcode:
Details:	SX Users Manual page # 88
Microchip PIC syntax:	GOTO addr
Notes:

See also: JMP PC+W, JMP W

JMP and SKIP instructions take 2 cycles in compatible mode, not 4 as stated in Table 3-7 in User's manual page 53.

file: /Techref/scenix/inst/jmp.htm, 1KB, , updated: 2005/12/6 16:09, local time: 2024/11/27 18:01,

^{18.188.101.251:LOG IN}

©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?

Please DO link to this page! Digg it! / MAKE!

<A HREF="http://sxlist.com/TECHREF/scenix/inst/jmp.htm"> SX Embedded Controller Instruction - JMP addr</A>

Did you find what you needed?

Welcome to sxlist.com!

Site supported by
sales, advertizing,
& kind contributors
just like you!
Please don't rip/copy
(here's why
Copies of the site on CD
are available at minimal cost.