...the jpic library must be updated with user definited bites and registers and the LCD pin's library set in acordingly with the hardware:
var volatile bit adcon0_go at f877_adcon0 : 2 var volatile byte f877_adcon1 at 0x9F var volatile byte f877_adcon0 at 0x1F var volatile byte f877_adresl at 0x9E var volatile byte f877_adresh at 0x1E
include f877_4 include jpic include jprint include jdelay include hd447804 var byte data var byte ch0_hi = 0 var byte ch0_lo = 0 procedure aqui is assembler local wait bsf status_rp0 -- bank 1 bcf status_rp1 movlw 0b_1000_1110 movwf f877_adcon1 -- right justified, an0 bcf status_rp0 -- bank 0 movlw 0b_0100_0001 -- Fosc/8 [7-6], A/D ch0 [5-3], a/d on [0] movwf f877_adcon0 bsf adcon0_go -- Start A/D conversion Wait: btfsc adcon0_go -- Wait for conversion to complete goto Wait movf f877_adresh,w -- Write A/D result to ch0_lo, ch0_hi movwf ch0_hi bsf status_rp0 -- bank 1 bcf status_rp1 movf f877_adresl,w bcf status_rp0 -- bank 0 movwf ch0_lo bcf status_rp0 end assembler end procedure hd44780_clear forever loop aqui hd44780_line1 print_decimal_1 ( hd44780, ch0_hi, "0" ) hd44780_position ( 2 ) print_decimal_3 ( hd44780, ch0_lo, "0" ) delay_100mS ( 3 ) end loop