Prev Next

ACCESS_MASK info Overview Group

The ACCESS_MASK structure is one doubleword value containing standard, specific, and generic rights. These rights are used in access-control entries (ACEs) and are the primary means of specifying the requested or granted access to an object.

typedef DWORD ACCESS_MASK;

The bits in this value are allocated as follows:

Bits	Meaning
0 through 15	Specific rights. Contains the access mask specific to the object type associated with the mask.
16 through 23	Standard rights. Contains the object’s standard access rights and can be a combination of the following predefined flags:

Bit	Flag	Meaning
16	DELETE	Delete access
17	READ_CONTROL	Read access to the owner, group, and discretionary access-control list (ACL) of the security descriptor
18	WRITE_DAC	Write access to the discretionary access-control list (ACL)
19	WRITE_OWNER	Write access to owner
20	SYNCHRONIZE	Windows NT: Synchronize access

Bits	Meaning
24	Access system security (ACCESS_SYSTEM_SECURITY). This flag is not a typical access type. It is used to indicate access to a system ACL. This type of access requires the calling process to have a specific privilege.
25	Maximum allowed (MAXIMUM_ALLOWED)
26 through 27	Reserved
28	Generic all (GENERIC_ALL)
29	Generic execute (GENERIC_EXECUTE)
30	Generic write (GENERIC_WRITE)
31	Generic read (GENERIC_READ)

The following constants represent the specific and standard access rights:

#define SPECIFIC_RIGHTS_ALL           0x0000FFFF 

#define STANDARD_RIGHTS_REQUIRED      0x000F0000 

#define STANDARD_RIGHTS_ALL           0x001F0000

ACCESS_MASK info Overview Group

See Also

Welcome to sxlist.com!

Welcome to sxlist.com!