VirtualFreeEx info  Overview  Group

The VirtualFreeEx function releases, decommits, or both, a region of memory within the virtual address space of a specified process.

The difference between the VirtualFreeEx function and the VirtualFree function is that VirtualFree frees memory within the address space of the calling process, while VirtualFreeEx lets you specify a process.

BOOL VirtualFreeEx(

Parameters

hProcess

Handle to a process. The function frees memory within the virtual address space of this process.

You must have PROCESS_VM_OPERATION access to this process. If you do not, the function fails.

lpAddress

Pointer to the starting address of the region of memory to free.

If the MEM_RELEASE flag is set in the dwFreeType parameter, lpAddress must be the base address returned by the VirtualAllocEx function when the region was reserved.

dwSize

Specifies the size, in bytes, of the region of memory to free.

If the MEM_RELEASE flag is set in the dwFreeType parameter, dwSize must be zero. The function frees the entire region that was reserved in the initial allocation call to VirtualAllocEx.

If the MEM_DECOMMIT flag is set, the function decommits all memory pages that contain one or more bytes in the range from the lpAddress parameter to (lpAddress+dwSize). This means, for example, that a 2-byte region of memory that straddles a page boundary causes both pages to be decommitted.

The function decommits the entire region that was reserved by VirtualAllocEx. If the following three conditions are met:

· the MEM_DECOMMIT flag is set

· lpAddress is the base address returned by the VirtualAllocEx function when the region was reserved

· dwSize is zero

The entire region the enters the reserved state.

dwFreeType

Set of bit flags that specifies the type of free operation. You must set one of the following two flags:

Flag	Meaning
MEM_DECOMMIT	The function decommits the specified region of pages. The pages enter the reserved state.
	The function does not fail if you attempt to decommit an uncommitted page. This means that you can decommit a range of pages without first determining their current commitment state.
MEM_RELEASE	The function releases the specified region of pages. The pages enter the free state. If you specify this flag, dwSize must be zero, and lpAddress must point to the base address returned by the VirtualAllocEx function when the region was reserved. The function fails if either of these conditions is not met.
	If any pages in the region are currently committed, the function first decommits and then releases them. The function does not fail if you attempt to release pages that are in different states, some reserved and some committed. This means that you can release a range of pages without first determining their current commitment state.

Return Values

If the function succeeds, the return value is a nonzero value.

If the function fails, the return value is zero. To get extended error information, call GetLastError.

Remarks

Each page of memory in a process’s virtual address space is in one of three states:

The VirtualFreeEx function can perform the following operations:

• Decommit a region of committed or uncommitted pages. After this operation, the pages are in the reserved state.

• Release a region of reserved pages. After this operation, the pages are in the free state.

• Decommit and release a region of committed or uncommitted pages. After this operation, the pages are in the free state.

The VirtualFreeEx function can decommit a range of pages that are in different states, some committed and some uncommitted. This means that you can decommit a range of pages without first determining the current commitment state of each page. Decommitting a page releases its physical storage, either in memory or in the paging file on disk.

If a page is decommitted but not released, its state changes to reserved. You can subsequently call VirtualAllocEx to commit it, or VirtualFreeEx to release it. Attempting to read from or write to a reserved page results in an access violation exception.

The VirtualFreeEx function can release a range of pages that are in different states, some reserved and some committed. This means that you can release a range of pages without first determining the current commitment state of each page. The entire range of pages originally reserved by the VirtualAllocEx function must be released at the same time.

If a page is released, its state changes to free, and it is available for subsequent allocation operations. Attempting to read from or write to a free page results in an access violation exception.

See Also

GlobalAlloc, GlobalFree, VirtualAlloc, VirtualAllocEx, VirtualFree 

  .