Simon Nield [simon.nield at quantel.com] says:
one thing to bear in mind when accessing the parallel port in epp mode is that it _does_ drop back into spp mode between reads / writes, so make sure you set up the spp mode correctly first.I have pasted a small code snippet below that worked fine in Win95.
The hardware end of this code was an Altera 7k128 in case you were wondering.
unsigned short PORT=0x378; // parallel base port typedef struct FooCtrl { short position; } FooCtrl; void TalkToFooCtrl( FooCtrl *testboard, unsigned short base, short pwm) { unsigned short address_port, data_port, control_port; short position_delta; control_port = base + 2; // SPP control port address_port = base + 3; // EPP address port data_port = base + 4; // EPP data port _outp(control_port, 0x00); // ensure strobes deasserted in between EPP transfers _outp(address_port, pwm); _outp(data_port, pwm >> 8); position_delta = _inp(data_port); position_delta = position_delta << 8; position_delta += _inp(address_port); testboard->position = position_delta; }
file: /Techref/io/parallel/1284/ecp-ccode-sn.htm, 1KB, , updated: 2002/9/24 06:03, local time: 2024/8/14 22:54,
18.117.170.135:LOG IN
|
©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://sxlist.com/TECHREF/io/parallel/1284/ecp-ccode-sn.htm"> IEEE-1284 / Centronix / Parallel Port </A> |
Did you find what you needed? |
Welcome to sxlist.com!sales, advertizing, & kind contributors just like you! Please don't rip/copy (here's why Copies of the site on CD are available at minimal cost. |
Welcome to sxlist.com! |
.