TIME+Displaying the Current Time
     Displays the current time and allows you to reset the time.
    VERSION
          PC-DOS 2.0+ (revised from 1.0; revised again in 3.3)
	  MS-DOS equivalent: TIME (2.0+; revised from 1.0)
    TYPE
          Internal
    SYNTAX
	  TIME [hh:mm[:ss[.xx]]]
    OPTIONS
	  hh   Hours
	  mm   Minutes
	  ss   Seconds
	  .xx  Hundredths of seconds
    EXAMPLES
	  TIME 21:30
sets the time to 21:30:00:00 (9:30 p.m.).
	  TIME
returns the current time as indicated by the system clock and 
prompts you for a new time. You can accept the current time by 
pressing Return.
    MESSAGE
	  Invalid time
Reenter the time in the correct format, with a colon (:) between 
hours and minutes as well as between minutes and seconds. Use a 
period (.) between seconds and hundredths of a second.
    UNDO
     If you set the time incorrectly, use the TIME command a 
second time and enter the current time.
    NOTE
     In version 3.3 of PC-DOS, the TIME command also changes the 
permanent clock, if the system has one.
------------------------------------------------------------------
		  [For related topics, press R]
    SEE ALSO
          DATE Command


  .