SZ | |
Description: | Skip if zero |
Operation: | Z |
Flags affected: | none |
Registers affected: | PC |
Sources referenced: | Z |
Cycles: | 1 |
Opcode: | |
Actually compiles to: | sb 3.2 |
Microchip PIC syntax: | BTFSS 3,2 |
Notes: |
is actually a SB 3, 2 instruction where 3 is the status register and bit 2 is the zero flag.
file: /Techref/SCENIX/inst/sz.htm, 1KB, , updated: 2001/9/10 12:14, local time: 2024/8/14 14:09,
3.12.164.102:LOG IN
|
©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://sxlist.com/TECHREF/SCENIX/inst/sz.htm"> SX Embedded Controller Instruction </A> |
Did you find what you needed? |
Welcome to sxlist.com!sales, advertizing, & kind contributors just like you! Please don't rip/copy (here's why Copies of the site on CD are available at minimal cost. |
Welcome to sxlist.com! |
.