RET |
|
Description: | Return from call |
Operation: | PC = STACK[SP--] |
Flags affected: | none |
Registers affected: | PC |
Sources referenced: | - |
Cycles: | 1 |
Opcode: | |
Details: | SX Users Manual page # 113 |
Microchip PIC syntax: | |
Notes: |
RET - Same as RETW but the W register is not affected. (Beware that MPASM, without warning, assembles RETURN as RETLW 0.)
by Loren Blaney via Richard Ottosen
See also:
file: /Techref/SCENIX/inst/ret.htm, 1KB, , updated: 2001/1/2 15:59, local time: 2024/8/14 13:54,
18.223.237.143:LOG IN
|
©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://sxlist.com/TECHREF/SCENIX/inst/ret.htm"> SX Embedded Controller Instruction - RET</A> |
Did you find what you needed? |
Welcome to sxlist.com!sales, advertizing, & kind contributors just like you! Please don't rip/copy (here's why Copies of the site on CD are available at minimal cost. |
The Backwoods Guide to Computer Lingo |
.